# $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
# Release isapnptools-1.21 (library isapnptools-1.21)
# 
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
# 
# For details of the output file format, see isapnp.conf(5)
# 
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
# 
# Compiler flags:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
# (for   library:  -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR)
# 
# Trying port address 0273
# Board 1 has serial identifier 33 ff ff ff ff 37 47 63 0e

# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 33 ff ff ff ff 37 47 63 0e)
# Vendor Id CSC4737, No Serial Number (-1), checksum 0x33.
# Version 1.0, Vendor version 0.1
# ANSI string -->Crystal Codec(DAEWOO)<--
#
# Logical device id CSC0000
#     Device supports vendor reserved register @ 0x39
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3b
#     Device supports vendor reserved register @ 0x3e
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSC4737/-1 (LD 0
#     ANSI string -->WSS/SB<--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       First DMA channel 1.
#             8 bit DMA only
#             Logical device is a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type A
# (DMA 0 (CHANNEL 1))
#       Next DMA channel 0 or 3.
#             8 bit DMA only
#             Logical device is a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type A
# (DMA 1 (CHANNEL 0))
#       IRQ 5.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0534
#             Maximum IO base address 0x0534
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0534))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0220
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 2 (SIZE 16) (BASE 0x0220))

#       Start dependent functions: priority acceptable
#       First DMA channel 1 or 3.
#             8 bit DMA only
#             Logical device is a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type A
# (DMA 0 (CHANNEL 1))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type A
# (DMA 1 (CHANNEL 0))
#       IRQ 5, 7, 9, 11, 12 or 15.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0534
#             Maximum IO base address 0x0608
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0534))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0260
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 2 (SIZE 16) (BASE 0x0220))

#       Start dependent functions: priority functional
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type A
# (DMA 0 (CHANNEL 0))
#       IRQ 5, 7, 9, 11, 12 or 15.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0534
#             Maximum IO base address 0x0ffc
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0534))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x03f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0300
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
# (IO 2 (SIZE 16) (BASE 0x0220))

#     End dependent functions
 (NAME "CSC4737/-1[0]{WSS/SB              }")
# (ACT Y)
))
#
# Logical device id CSC0001
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x39
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3b
#     Device supports vendor reserved register @ 0x3e
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSC4737/-1 (LD 1
#     ANSI string -->GAME<--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0200
#             Maximum IO base address 0x0200
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0200))

#       Start dependent functions: priority acceptable
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0208
#             Maximum IO base address 0x0208
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0208))

#     End dependent functions
 (NAME "CSC4737/-1[1]{GAME                }")
# (ACT Y)
))
#
# Logical device id CSC0010
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x39
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3b
#     Device supports vendor reserved register @ 0x3e
#     Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSC4737/-1 (LD 2
#     ANSI string -->CTRL<--
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x0120
#         Maximum IO base address 0x03f8
#         IO base alignment 8 bytes
#         Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0120))
 (NAME "CSC4737/-1[2]{CTRL                }")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)