Liebe Listenleser, ich habe hier einen Rechner mit SuSE 8.2 und einer AVM Fritz ISDN Karte (PCI). Hardware- und Treibermäßig scheint soweit alles in Ordnung zu sein, jedenfalls kann ich an der ISDN Anlage sehen, dass gewählt wird, aber irgendwie kommt keine Verbindung zustande. Ich weiss nicht mehr so recht, wo ich schauen kann. Aus den Meldungen auf stdout (s.u.) werde ich jedenfalls nicht wirklich schlau :-( Liebe Grüße und schönes WE David capiinfo gibt folgendes aus: Number of Controllers : 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.100-02 (49.2) Serial Number: 1000001 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0x4000011f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing T.30 modem for fax group 3 Modem asyncronous operation with start/stop byte framing B2 protocols support: 0x00000b1b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) T.30 fro fax group 3 ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x800000bf Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE T.30 for fax group 3 reserved 0100 0200 39000000 1f010040 1b0b0000 bf000080 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00020000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS und pppd callisdn/freenet usepeerdns erzeugt folgendes, bevor keine Verbindung zustande kommt: Plugin userpass.so loaded. userpass: $Revision: 1.3 $ Plugin capiplugin.so loaded. capiplugin: $Revision: 1.31 $ capiconn: 1.7 capiplugin: phase serialconn. capiplugin: contr=1 controller 1: listen_change_state 0 -> 1 contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 controller 1: listen_change_state 1 -> 0 plci_change_state:0x0 0 -> 1 event=1 capiplugin: dialing 0101901929 (hdlc) plci_change_state:0x101 1 -> 2 event=3 DISCONNECT_IND reason 0x3481 (Unallocated (unassigned) number) for plci 0x101 plci_change_state:0x101 2 -> 8 event=9 plci_change_state:0x101 8 -> 0 event=11 capiplugin: disconnect(remote): "" -> "0101901929" outgoing (pcli=0x101/ncci=0x0) 0x3481 (0x0000) - Unallocated (unassigned) number plci_change_state:0x0 0 -> 1 event=1 capiplugin: dialing 0101901929 (hdlc) plci_change_state:0x101 1 -> 2 event=3 DISCONNECT_IND reason 0x3481 (Unallocated (unassigned) number) for plci 0x101 plci_change_state:0x101 2 -> 8 event=9 plci_change_state:0x101 8 -> 0 event=11 capiplugin: disconnect(remote): "" -> "0101901929" outgoing (pcli=0x101/ncci=0x0) 0x3481 (0x0000) - Unallocated (unassigned) number plci_change_state:0x0 0 -> 1 event=1 capiplugin: dialing 0101901929 (hdlc) plci_change_state:0x101 1 -> 2 event=3 DISCONNECT_IND reason 0x3481 (Unallocated (unassigned) number) for plci 0x101 plci_change_state:0x101 2 -> 8 event=9 plci_change_state:0x101 8 -> 0 event=11 capiplugin: disconnect(remote): "" -> "0101901929" outgoing (pcli=0x101/ncci=0x0) 0x3481 (0x0000) - Unallocated (unassigned) number plci_change_state:0x0 0 -> 1 event=1 capiplugin: dialing 0101901929 (hdlc) plci_change_state:0x101 1 -> 2 event=3 DISCONNECT_IND reason 0x3481 (Unallocated (unassigned) number) for plci 0x101 plci_change_state:0x101 2 -> 8 event=9 plci_change_state:0x101 8 -> 0 event=11 capiplugin: disconnect(remote): "" -> "0101901929" outgoing (pcli=0x101/ncci=0x0) 0x3481 (0x0000) - Unallocated (unassigned) number capiplugin: couldn't make connection after 4 retries controller 1: listen_change_state 0 -> 1 contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 controller 1: listen_change_state 1 -> 0 capiplugin: exit