Hallo, ich spiele grade etwas mit bootsplash herum, um mein slackware system aufzupeppen. nachdem ich den entsprechenden kernelpatch eingespielt habe, muss ich dazu in lilo auch die initrd benennen. dann stürtzt mir der kernel aber immer beim booten ab. wenn ich keine initrd übergebe, läuft alles gut durch das einzige, daß ich finde ist in /var/log/syslog sshd[7680] error: Bind to port 22 on 0.0.0.0 failed. Address already in use ich hänge mal die komplette boot ausgabe an. für jeden tipp bin ich dankbar. achja , gibt es irgendwo tiefergehende infos zu initrd, ausser man mkinitrd danke c~ --------------------- schnipp boot: Linux2614 Loading Linux2614................................ BIOS data check successful Linux version 2.6.14soundroom (root@soundroom) (gcc version 4.0.2) #24 PREEMPT Sun Feb 19 23:53:596 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) BIOS-e820: 000000001f6e0000 - 000000001f6ed000 (ACPI data) BIOS-e820: 000000001f6ed000 - 000000001f700000 (ACPI NVS) BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 502MB LOWMEM available. DMI present. ACPI: PM-Timer IO Port: 0xf008 Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Built 1 zonelists Kernel command line: BOOT_IMAGE=Linux2614 ro root=801 console=tty0 console=ttyS0,9600n8 noinitrd Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2993.248 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 506788k/514944k available (2013k kernel code, 7724k reserved, 572k data, 160k init, 0k hig) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5992.63 BogoMIPS (lpj=11985274) Mount-cache hash table entries: 512 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e20) checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Freeing initrd memory: 273k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=11 PCI: Using MMCONFIG ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs *9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 9 10 11) *5 ACPI: PCI Interrupt Link [LNKG] (IRQs 9 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 9 10 *11) ACPI: Device [LPT] status [00000008]: functional but not present; setting present ACPI: Device [COM2] status [00000008]: functional but not present; setting present Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: f0100000-f01fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: f0200000-f02fffff PREFETCH window: disabled. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 Simple Boot Flag at 0x69 set to 0x1 apm: BIOS not found. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xe0000000, mapped to 0xe0080000, using 6144k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 vesafb: Mode is VGA compatible bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 156880 bytes,<6>...found (1. Console: switching to colour frame buffer device 122x45 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 4096 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x3800 irq 14 ata1: dev 0 ATA, max UDMA/133, 160086528 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix Vendor: ATA Model: Maxtor 6L080M0 Rev: BACE Type: Direct-Access ANSI SCSI revision: 05 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3808 irq 15 ata2: dev 0 ATAPI, max UDMA/33 ata2(0): applying bridge limits ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) SCSI device sda: drive cache: write back SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: PEXA PEXB PEXC PEXD PEXE USB1 USB2 USB3 USB4 USB5 PCIH KEYB PS2M COM1 COM2 ACPI: (supports S0 S1 S3 S4 S5) EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. EXT3-fs: recovery complete. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 160k freed INIT: version 2.84 booting proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) Initializing udev dynamic device directory. Testing root filesystem status: read-only filesystem Checking EXT3 FS on sda1, root filesystem:internal journal fsck 1.35 (28-Feb-2004) /dev/sda1: clean, 337262/19543392 files, 3784882/19531015 blocks (check in 4 mounts) Remounting root device with read-write enabled. /dev/sda1 on / type ext3 (rw) Setting system time from the hardware clock (localtime). Module dependencies up to date (no new kernel modules found). Linux agpgart interface v0.101 (c) Dave Jones input: PS/2 Generic Mouse on isa0060/serio1 usbcore: registered new driver usbfs usbcore: registered new driver hub Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. Checking non-root filesystems: fsck 1.35 (28-Feb-2004) devpts on /dev/pts type devpts (rw,gid=5,mode=620) mount: special device /dev/ubb1 does not exist Using /etc/random-seed to initialize /dev/urandom. INIT: Entering runlevel: 4 Going multiuser... cannot (un)set powersave mode Starting sysklogd daemons: /usr/sbin/syslogd /usr/sbin/klogd -c 3 -x Starting PCMCIA services: <Probing for PCIC: edit /etc/rc.d/rc.pcmcia> cardmgr[5170]: no sockets found! Activating hardware detection: /etc/rc.d/rc.hotplug start Starting Internet super-server daemon: /usr/sbin/inetd Starting OpenSSH SSH daemon: /usr/sbin/sshd Updating shared library links: /sbin/ldconfig Updating X font indexes: /usr/X11R6/bin/fc-cache Starting ACPI daemon: /usr/sbin/acpid Loading ALSA kernel modules. FATAL: Module snd_hda_intel not found. Loading 512-char 8x12 font from file /usr/share/kbd/consolefonts/Agafari-12.psfu.gz und hier geht es nicht weiter.