ISDN unter SuSE 8.2

[David Christopher Weichert]

Liebe Listenleser,

ich habe hier einen Rechner mit SuSE 8.2 und einer AVM Fritz ISDN Karte
(PCI). Hardware- und Treibermäßig scheint soweit alles in Ordnung zu
sein, jedenfalls kann ich an der ISDN Anlage sehen, dass gewählt wird,
aber irgendwie kommt keine Verbindung zustande. Ich weiss nicht mehr so
recht, wo ich schauen kann. Aus den Meldungen auf stdout (s.u.) werde
ich jedenfalls nicht wirklich schlau :-(

Liebe Grüße und schönes WE
David


capiinfo gibt folgendes aus:

Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.100-02  (49.2)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
   internal controller supported
   DTMF supported
   Supplementary Services supported
   channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
   64 kbit/s with HDLC framing
   64 kbit/s bit-transparent operation
   V.110 asynconous operation with start/stop byte framing
   V.110 synconous operation with HDLC framing
   T.30 modem for fax group 3
   Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
   ISO 7776 (X.75 SLP)
   Transparent
   LAPD with Q.921 for D channel X.25 (SAPI 16)
   T.30 fro fax group 3
   ISO 7776 (X.75 SLP) with V.42bis compression
   V.120 asyncronous mode
   V.120 bit-transparent mode
B3 protocols support: 0x800000bf
   Transparent
   T.90NL, T.70NL, T.90
   ISO 8208 (X.25 DTE-DTE)
   X.25 DCE
   T.30 for fax group 3
   reserved

  0100
  0200
  39000000
  1f010040
  1b0b0000
  bf000080
  00000000 00000000 00000000 00000000 00000000 00000000
  01000001 00020000 00000000 00000000 00000000

Supplementary services support: 0x000003ff
   Hold / Retrieve
   Terminal Portability
   ECT
   3PTY
   Call Forwarding
   Call Deflection
   MCID
   CCBS

und pppd callisdn/freenet usepeerdns erzeugt folgendes, bevor keine
Verbindung zustande kommt:

Plugin userpass.so loaded.
userpass: $Revision: 1.3 $
Plugin capiplugin.so loaded.
capiplugin: $Revision: 1.31 $
capiconn:  1.7 
capiplugin: phase serialconn.
capiplugin: contr=1
controller 1: listen_change_state 0 -> 1
contr 1: listenconf Info=0x0000 (No additional information)
infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dialing 0101901929 (hdlc)
plci_change_state:0x101 1 -> 2 event=3
DISCONNECT_IND reason 0x3481 (Unallocated (unassigned) number) for plci
0x101
plci_change_state:0x101 2 -> 8 event=9
plci_change_state:0x101 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "0101901929" outgoing
(pcli=0x101/ncci=0x0) 0x3481 (0x0000) - Unallocated (unassigned) number
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dialing 0101901929 (hdlc)
plci_change_state:0x101 1 -> 2 event=3
DISCONNECT_IND reason 0x3481 (Unallocated (unassigned) number) for plci
0x101
plci_change_state:0x101 2 -> 8 event=9
plci_change_state:0x101 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "0101901929" outgoing
(pcli=0x101/ncci=0x0) 0x3481 (0x0000) - Unallocated (unassigned) number
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dialing 0101901929 (hdlc)
plci_change_state:0x101 1 -> 2 event=3
DISCONNECT_IND reason 0x3481 (Unallocated (unassigned) number) for plci
0x101
plci_change_state:0x101 2 -> 8 event=9
plci_change_state:0x101 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "0101901929" outgoing
(pcli=0x101/ncci=0x0) 0x3481 (0x0000) - Unallocated (unassigned) number
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dialing 0101901929 (hdlc)
plci_change_state:0x101 1 -> 2 event=3
DISCONNECT_IND reason 0x3481 (Unallocated (unassigned) number) for plci
0x101
plci_change_state:0x101 2 -> 8 event=9
plci_change_state:0x101 8 -> 0 event=11
capiplugin: disconnect(remote): "" -> "0101901929" outgoing
(pcli=0x101/ncci=0x0) 0x3481 (0x0000) - Unallocated (unassigned) number
capiplugin: couldn't make connection after 4 retries
controller 1: listen_change_state 0 -> 1
contr 1: listenconf Info=0x0000 (No additional information)
infomask=0x144 cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
capiplugin: exit