Hi,
bin immer noch dabei, die zweite Grafikkarte und den zweiten Monitor
einzubinden und finde den Fehler nicht. System ist Knoppix 3.3 mit
Kernel 2.4.22 auf Festplatte.
lspci | grep VGA gibt folgendes aus:
#schnipp
00:0d.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W
[Millennium] (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti
200] (rev a3)
#schnapp
cat /proc/pci sagt folgendes:
#schnipp
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
(rev 0).
Prefetchable 32 bit memory at 0xfc000000 [0xfdffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333
AGP] (rev 0).
Master Capable. No bursts. Min Gnt=8.
Bus 0, device 5, function 0:
Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 16).
IRQ 10.
Master Capable. Latency=32. Min Gnt=2.Max Lat=24.
I/O at 0xd800 [0xd8ff].
Bus 0, device 13, function 0:
VGA compatible controller: Matrox Graphics, Inc. MGA 2064W
[Millennium] (rev 1).
IRQ 11.
Non-prefetchable 32 bit memory at 0xeb800000 [0xeb803fff].
Prefetchable 32 bit memory at 0xee800000 [0xeeffffff].
Bus 0, device 15, function 0:
Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 2).
IRQ 5.
Master Capable. Latency=32. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xed800000 [0xed800fff].
Bus 0, device 15, function 1:
Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 2).
IRQ 5.
Master Capable. Latency=32. Min Gnt=4.Max Lat=255.
Prefetchable 32 bit memory at 0xed000000 [0xed000fff].
Bus 0, device 16, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 16).
IRQ 9.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xd400 [0xd4ff].
Non-prefetchable 32 bit memory at 0xeb000000 [0xeb0000ff].
Bus 0, device 17, function 0:
ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge (rev 0).
Bus 0, device 17, function 1:
IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 6).
IRQ 11.
Master Capable. Latency=32.
I/O at 0xd000 [0xd00f].
Bus 0, device 17, function 2:
USB Controller: VIA Technologies, Inc. USB (rev 35).
IRQ 9.
Master Capable. Latency=32.
I/O at 0xb800 [0xb81f].
Bus 0, device 17, function 3:
USB Controller: VIA Technologies, Inc. USB (#2) (rev 35).
IRQ 9.
Master Capable. Latency=32.
I/O at 0xb400 [0xb41f].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti
200] (rev 163).
IRQ 11.
Master Capable. Latency=64. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xec000000 [0xecffffff].
Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff].
Prefetchable 32 bit memory at 0xef800000 [0xef87ffff].
#schnapp
Die Karte, auf die beim booten zuerst zugegriffen wird, ist die Geforce.
Ich bin folgendermaßen vorgegangen:
Habe die Geforce ausgebaut und den Rechner mit einer Knoppix-CD und der
Matroxkarte gebootet. Hab die XF86-Config-4 auf Diskette kopiert.
Rechner runtergefahren, die Geforce wieder eingebaut und von Festplatte
gebootet. Anschließend habe ich die XF86Config wie nachfolgend editiert
und in nach /etc/X11 kopiert:
#schnipp
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen1" 0 0
Screen 1 "Screen0" RightOf "Screen1"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see
/etc/X11/XftConfig!
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "speedo"
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by KNOPPIX mkxf86config
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
# VertRefresh 50.0 - 76.0 # Very conservative. May flicker.
VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# These are the DDC-probed settings reported by your monitor.
# 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
+hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
+hsync +vsync
# 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
ModeLine "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806
-hsync -vsync
# 1024x768, 60.0Hz; hfreq=48.36, vfreq=60.00
ModeLine "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806
-hsync -vsync
# 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
ModeLine "800x600" 49.50 800 816 896 1056 600 601 604 625
+hsync +vsync
# 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19
ModeLine "800x600" 50.00 800 856 976 1040 600 637 643 666
+hsync +vsync
# 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
ModeLine "800x600" 40.00 800 840 968 1056 600 601 605 628
+hsync +vsync
# 800x600, 56.0Hz; hfreq=35.16, vfreq=56.25
ModeLine "800x600" 36.00 800 824 896 1024 600 601 603 625
+hsync +vsync
# 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
ModeLine "640x480" 31.50 640 656 720 840 480 481 484 500
-hsync -vsync
# 640x480, 72.0Hz; hfreq=37.86, vfreq=72.81
ModeLine "640x480" 31.50 640 656 696 816 480 481 484 504
-hsync -vsync
# 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
ModeLine "640x480" 25.17 640 648 744 784 480 482 484 509
-hsync -vsync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814
-HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895
-HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907
-HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915
-HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001
-HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002
-HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017
-HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085
-HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087
-HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094
-HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096
-HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103
-HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112
-HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271
-HSync +Vsync
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 76.0 # Very conservative. May flicker.
# These are some Modelines that happen to work on many systems
# Especially the "1024x768" has been thoroughly tested, even on Laptops
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902
-HSync -VSync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165
Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068
-HSync -VSync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072
+HSync +VSync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072
-HSync -VSync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250
+HSync +VSync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250
-HSync -VSync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250
+HSync +VSync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244
+HSync +VSync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490
+HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490
+HSync +VSync
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "nv"
VendorName "All"
BoardName "All"
BusID "PCI:01:00:0"
EndSection
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card1"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "mga"
VendorName "All"
BoardName "All"
BusID "PCI:00:13:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
#schnapp
Jetzt passiert folgendes: Der Rechner fährt auf Monitor 0 hoch und
versucht dann, den X-Server zu starten. Screen 1 sagt "no signal" . In
dem Moment, wenn auf Screen 0 der X-Server starten möchte, springt
Screen 1 an und gibt und zeigt die Matrox an. Danach ist hängen im
Schacht. Beide Screens sind dunkel, kein wie auch immer gearteter
X-Server läuft, login auf einer anderen Textkonsole nicht möglich. Meine
Vermutung ist, das ich vielleicht irgendeinen Bock bei der Bus-ID
geschossen habe.
Ich weiß echt nicht mehr, wo ich den Fehler sonst suchen soll.
Vielleicht erbarmt sich nochmal jemand.
Vielen Dank für eure Geduld.
Gruss
Juergen
--
Juergen Gruenebaum
Mail: juergen(a)raescom.de