Hi, ich habe hier mal mit Althardware ein Raid5 (Neue Raidtools/Raiddriver) aufgesetzt. Natuerlich waren schon mal von 8 platten 3 Kaputt. Was ich mal spontan probiert ein hot-swap hinzubekommen - Funktioniert ... So bekomme ich ein volume aus dem raidset raus - melde es im kernel ab ziehe platte stecke neu melde es wieder an und adde es wieder zum raidset - Und schon laeuft der rebuild des raids los ... (root@move)~# raidhotremove /dev/md1 /dev/sde1 (root@move)~# echo "scsi remove-single-device 1 0 2 0" >/proc/scsi/scsi (root@move)~# echo "scsi add-single-device 1 0 2 0" >/proc/scsi/scsi (root@move)~# raidhotadd /dev/md1 /dev/sde1 1 0 2 0 steht fuer 1 - Hostadapter (0 ist der erste) 0 - Channel 0 2 - ID 0 0 - Lun 0 Prima ... Flo -- Florian Lohoff flo@rfc822.org +49-5241-470566 ... The failure can be random; however, when it does occur, it is catastrophic and is repeatable ... Cisco Field Notice