Fwd: CERT Advisory CA-2002-03 Multiple Vulnerabilities in Many Implementations

Hi, wer seine Cisco liebt - Der schiebt :) Eben reproduziert - Ciscos sind ohne die community zu wissen und ohne in der access list zu stehen abzuschiessen :) Wer wird jetzt alles nervoes ? ----- Forwarded message from CERT Advisory <cert-advisory@cert.org> ----- Date: Tue, 12 Feb 2002 14:36:05 -0500 (EST) From: CERT Advisory <cert-advisory@cert.org> To: cert-advisory@cert.org Subject: CERT Advisory CA-2002-03 Multiple Vulnerabilities in Many Implementations -----BEGIN PGP SIGNED MESSAGE----- CERT Advisory CA-2002-03: Multiple Vulnerabilities in Many Implementations of the Simple Network Management Protocol (SNMP) Original release date: February 12, 2002 Last revised: -- Source: CERT/CC A complete revision history can be found at the end of this file. Systems Affected Products from a very wide variety of vendors may be affected. See Vendor Information for details from vendors who have provided feedback for this advisory. In addition to the vendors who provided feedback for this advisory, a list of vendors whom CERT/CC contacted regarding these problems is available from http://www.kb.cert.org/vuls/id/854306 http://www.kb.cert.org/vuls/id/107186 Many other systems making use of SNMP may also be vulnerable but were not specifically tested. Overview Numerous vulnerabilities have been reported in multiple vendors' SNMP implementations. These vulnerabilities may allow unauthorized privileged access, denial-of-service attacks, or cause unstable behavior. If your site uses SNMP in any capacity, the CERT/CC encourages you to read this advisory and follow the advice provided in the Solution section below. In addition to this advisory, we also have an FAQ available at http://www.cert.org/tech_tips/snmp_faq.html I. Description The Simple Network Management Protocol (SNMP) is a widely deployed protocol that is commonly used to monitor and manage network devices. Version 1 of the protocol (SNMPv1) defines several types of SNMP messages that are used to request information or configuration changes, respond to requests, enumerate SNMP objects, and send unsolicited alerts. The Oulu University Secure Programming Group (OUSPG, http://www.ee.oulu.fi/research/ouspg/) has reported numerous vulnerabilities in SNMPv1 implementations from many different vendors. More information about SNMP and OUSPG can be found in Appendix C OUSPG's research focused on the manner in which SNMPv1 agents and managers handle request and trap messages. By applying the PROTOS c06-snmpv1 test suite (http://www.ee.oulu.fi/research/ouspg/protos/testing/c06/snmpv1/0100.h tml) to a variety of popular SNMPv1-enabled products, the OUSPG revealed the following vulnerabilities: VU#107186 - Multiple vulnerabilities in SNMPv1 trap handling SNMP trap messages are sent from agents to managers. A trap message may indicate a warning or error condition or otherwise notify the manager about the agent's state. SNMP managers must properly decode trap messages and process the resulting data. In testing, OUSPG found multiple vulnerabilities in the way many SNMP managers decode and process SNMP trap messages. VU#854306 - Multiple vulnerabilities in SNMPv1 request handling SNMP request messages are sent from managers to agents. Request messages might be issued to obtain information from an agent or to instruct the agent to configure the host device. SNMP agents must properly decode request messages and process the resulting data. In testing, OUSPG found multiple vulnerabilities in the way many SNMP agents decode and process SNMP request messages. Vulnerabilities in the decoding and subsequent processing of SNMP messages by both managers and agents may result in denial-of-service conditions, format string vulnerabilities, and buffer overflows. Some vulnerabilities do not require the SNMP message to use the correct SNMP community string. These vulnerabilities have been assigned the CVE identifiers CAN-2002-0012 and CAN-2002-0013, respectively. II. Impact These vulnerabilities may cause denial-of-service conditions, service interruptions, and in some cases may allow an attacker to gain access to the affected device. Specific impacts will vary from product to product. III. Solution Note that many of the mitigation steps recommended below may have significant impact on your everyday network operations and/or network architecture. Ensure that any changes made based on the following recommendations will not unacceptably affect your ongoing network operations capability. Apply a patch from your vendor Appendix A contains information provided by vendors for this advisory. Please consult this appendix to determine if you need to contact your vendor directly. Disable the SNMP service As a general rule, the CERT/CC recommends disabling any service or capability that is not explicitly required, including SNMP. Unfortunately, some of the affected products exhibited unexpected behavior or denial of service conditions when exposed to the OUSPG test suite even if SNMP was not enabled. In these cases, disabling SNMP should be used in conjunction with the filtering practices listed below to provide additional protection. Ingress filtering As a temporary measure, it may be possible to limit the scope of these vulnerabilities by blocking access to SNMP services at the network perimeter. Ingress filtering manages the flow of traffic as it enters a network under your administrative control. Servers are typically the only machines that need to accept inbound traffic from the public Internet. In the network usage policy of many sites, there are few reasons for external hosts to initiate inbound traffic to machines that provide no public services. Thus, ingress filtering should be performed at the border to prohibit externally initiated inbound traffic to non-authorized services. For SNMP, ingress filtering of the following ports can prevent attackers outside of your network from impacting vulnerable devices in the local network that are not explicitly authorized to provide public SNMP services. snmp 161/udp # Simple Network Management Protocol (SNMP) snmp 162/udp # SNMP system management messages The following services are less common, but may be used on some affected products snmp 161/tcp # Simple Network Management Protocol (SNMP) snmp 162/tcp # SNMP system management messages smux 199/tcp # SNMP Unix Multiplexer smux 199/udp # SNMP Unix Multiplexer synoptics-relay 391/tcp # SynOptics SNMP Relay Port synoptics-relay 391/udp # SynOptics SNMP Relay Port agentx 705/tcp # AgentX snmp-tcp-port 1993/tcp # cisco SNMP TCP port snmp-tcp-port 1993/udp # cisco SNMP TCP port As noted above, you should carefully consider the impact of blocking services that you may be using. It is important to note that in many SNMP implementations, the SNMP daemon may bind to all IP interfaces on the device. This has important consequences when considering appropriate packet filtering measures required to protect an SNMP-enabled device. For example, even if a device disallows SNMP packets directed to the IP addresses of its normal network interfaces, it may still be possible to exploit these vulnerabilities on that device through the use of packets directed at the following IP addresses: * "all-ones" broadcast address * subnet broadcast address * any internal loopback addresses (commonly used in routers for management purposes, not to be confused with the IP stack loopback address 127.0.0.1) Careful consideration should be given to addresses of the types mentioned above by sites planning for packet filtering as part of their mitigation strategy for these vulnerabilities. Finally, sites may wish to block access to the following RPC services related to SNMP (listed as name, program ID, alternate names) snmp 100122 na.snmp snmp-cmc snmp-synoptics snmp-unisys snmp-utk snmpv2 100138 na.snmpv2 # SNM Version 2.2.2 snmpXdmid 100249 Please note that this workaround may not protect vulnerable devices from internal attacks. Filter SNMP traffic from non-authorized internal hosts In many networks, only a limited number of network management systems need to originate SNMP request messages. Therefore, it may be possible to configure the SNMP agent systems (or the network devices in between the management and agent systems) to disallow request messages from non-authorized systems. This can reduce, but not wholly eliminate, the risk from internal attacks. However, it may have detrimental effects on network performance due to the increased load imposed by the filtering, so careful consideration is required before implementation. Similar caveats to the previous workaround regarding broadcast and loopback addresses apply. Change default community strings Most SNMP-enabled products ship with default community strings of "public" for read-only access and "private" for read-write access. As with any known default access control mechanism, the CERT/CC recommends that network administrators change these community strings to something of their own choosing. However, even when community strings are changed from their defaults, they will still be passed in plaintext and are therefore subject to packet sniffing attacks. SNMPv3 offers additional capabilities to ensure authentication and privacy as described in RFC2574. Because many of the vulnerabilities identified in this advisory occur before the community strings are evaluated, it is important to note that performing this step alone is not sufficient to mitigate the impact of these vulnerabilities. Nonetheless, it should be performed as part of good security practice. Segregate SNMP traffic onto a separate management network In situations where blocking or disabling SNMP is not possible, exposure to these vulnerabilities may be limited by restricting all SNMP access to separate, isolated management networks that are not publicly accessible. Although this would ideally involve physically separate networks, that kind of separation is probably not feasible in most environments. Mechanisms such as virtual LANs (VLANs) may be used to help segregate traffic on the same physical network. Note that VLANs may not strictly prevent an attacker from exploiting these vulnerabilities, but they may make it more difficult to initiate the attacks. Another option is for sites to restrict SNMP traffic to separate virtual private networks (VPNs), which employ cryptographically strong authentication. Note that these solutions may require extensive changes to a site's network architecture. Egress filtering Egress filtering manages the flow of traffic as it leaves a network under your administrative control. There is typically limited need for machines providing public services to initiate outbound traffic to the Internet. In the case of SNMP vulnerabilities, employing egress filtering on the ports listed above at your network border can prevent your network from being used as a source for attacks on other sites. Disable stack execution Disabling executable stacks (on systems where this is configurable) can reduce the risk of "stack smashing" attacks based on these vulnerabilities. Although this does not provide 100 percent protection against exploitation of these vulnerabilities, it makes the likelihood of a successful exploit much smaller. On many UNIX systems, executable stacks can be disabled by adding the following lines to /etc/system: set noexec_user_stack = 1 set noexec_user_stack_log = 1 Note that this may go against the SPARC and Intel ABIs and can be bypassed as required in programs with mprotect(2). For the changes to take effect you will then need to reboot. Other operating systems and architectures also support the disabling of executable stacks either through native configuration parameters or via third-party software. Consult your vendor(s) for additional information. Share tools and techniques Because dealing with these vulnerabilities to systems and networks is so complex, the CERT/CC will provide a forum where administrators can share ideas and techniques that can be used to develop proper defenses. We have created an unmoderated mailing list for system and network administrators to discuss helpful techniques and tools. You can subscribe to the mailing list by sending an email message to majordomo@cert.org. In the body of the message, type subscribe snmp-forum After you receive the confirmation message, follow the instructions in the message to complete the subscription process. Appendix A. - Vendor Information This appendix contains information provided by vendors for this advisory. As vendors report new information to the CERT/CC, we will update this section and note the changes in our revision history. If a particular vendor is not listed below, we have not received their comments. AdventNet This is in reference to your notification regarding [VU#107186 and VU#854306] and OUSPG#0100. AdventNet Inc. has reproduced this behavior in their products and coded a Service Pack fix which is currently in regression testing in AdventNet Inc.'s Q.A. organization. The release of AdventNet Inc's. Service Pack correcting the behavior outlined in VU#617947, and OUSPG#0100 is scheduled to be generally available to all of AdventNet Inc.'s customers by February 20, 2002. Avaya Avaya Inc. acknowledges the potential of SNMP vulnerabilities and is currently investigating whether these vulnerabilities impact Avaya's products or solutions. No further information is available at this time. CacheFlow The purpose of this email is to advise you that CacheFlow Inc. has provided a software update. Please be advised that updated versions of the software are now available for all supported CacheFlow hardware platforms, and may be obtained by CacheFlow customers at the following URL: http://download.cacheflow.com/ The specific reference to the software update is contained within the Release Notes for CacheOS Versions 3.1.22 Release ID 17146, 4.0.15 Release ID 17148, 4.1.02 Release ID 17144 and 4.0.15 Release ID 17149. RELEASE NOTES FOR CACHEFLOW SERVER ACCELERATOR PRODUCTS: * http://download.cacheflow.com/release/SA/4.0.15/relnotes.htm RELEASE NOTES FOR CACHEFLOW CONTENT ACCELERATOR PRODUCTS: * http://download.cacheflow.com/release/CA/3.1.22/relnotes.htm * http://download.cacheflow.com/release/CA/4.0.15/relnotes.htm * http://download.cacheflow.com/release/CA/4.1.02/relnotes.htm * SR 1-1647517, VI 13045: This update modified a potential vulnerability by using an SNMP test tools exploit. 3Com Corporation A vulnerability to an SNMP packet with an invalid length community string has been resolved in the following products. Customers concerned about this weakness should ensure that they upgrade to the following agent versions: PS Hub 40 2.16 is due Feb 2002 PS Hub 50 2.16 is due Feb 2002 Dual Speed Hub 2.16 is due Jan 2002 Switch 1100/3300 2.68 is available now Switch 4400 2.02 is available now Switch 4900 2.04 is available now WebCache1000/3000 2.00 is due Jan 2002 Caldera Caldera International, Inc. has reproduced faulty behavior in Caldera SCO OpenServer 5, Caldera UnixWare 7, and Caldera Open UNIX 8. We have coded a software fix for supported versions of Caldera UnixWare 7 and Caldera Open UNIX 8 that will be available from our support site at http://stage.caldera.com/support/security immediately following the publication of this CERT announcement. A fix for supported versions of OpenServer 5 will be available at a later date. Cisco Systems Cisco Systems is addressing the vulnerabilities identified by VU#854306 and VU#107186 across its entire product line. Cisco will publish a security advisory with further details at http://www.cisco.com/go/psirt/. Compaq Computer Corporation x-ref: SSRT0779U SNMP At the time of writing this document, COMPAQ continues to evaluate this potential problem and when new versions of SNMP are available, COMPAQ will implement solutions based on the new code. Compaq will provide notice of any new patches as a result of that effort through standard patch notification procedures and be available from your normal Compaq Services support channel. Computer Associates Computer Associates has confirmed Unicenter vulnerability to the SNMP advisory identified by CERT notification reference [VU#107186 & VU#854306] and OUSPG#0100. We have produced corrective maintenance to address these vulnerabilities, which is in the process of publication for all applicable releases / platforms and will be offered through the CA Support site. Please contact our Technical Support organization for information regarding availability / applicability for your specific configuration(s). COMTEK Services, Inc. NMServer for AS/400 is not an SNMP master and is therefore not vulnerable. However this product requires the use of the AS/400 SNMP master agent supplied by IBM. Please refer to IBM for statements of vulnerabilities for the AS/400 SNMP master agent. NMServer for OpenVMS has been tested and has shown to be vulnerable. COMTEK Services is preparing a new release of this product (version 3.5) which will contain a fix for this problem. This new release is scheduled to be available in February 2002. Contact COMTEK Services for further information. NMServer for VOS has not as yet been tested; vulnerability of this agent is unknown. Contact for further information on the testing schedule of the VOS product. Covalent Technologies Covalent Technologies ERS (Enterprise Ready Server), Secure Server, and Conductor SNMP module are not vulnerable according to testing performed in accordance with CERT recommendations. Security information for Covalent products can be found at www.covalent.net Dartware, LLC Dartware, LLC (www.dartware.com) supplies two products that use SNMPv1 in a manager role, InterMapper and SNMP Watcher. These products are not vulnerable to the SNMP vulnerability described in [VU#854306 and VU#107186]. This statement applies to all present and past versions of these two software packages. DMH Software DMH Software is in the process of evaluating and attempting to reproduce this behavior. It is unclear at this point if our snmp-agent is sensitive to the tests described above. If any problems will be discovered, DMH Software will code a software fix. The release of DMH Software OS correcting the behavior outlined in VU#854306, VU#107186, and OUSPG#0100 will be generally available to all of DMH Software's customers as soon as possible. EnGarde Secure Linux EnGarde Secure Linux did not ship any SNMP packages in version 1.0.1 of our distribution, so we are not vulnerable to either bug. FreeBSD FreeBSD does not include any SNMP software by default, and so is not vulnerable. However, the FreeBSD Ports Collection contains the UCD-SNMP / NET-SNMP package. Package versions prior to ucd-snmp-4.2.3 are vulnerable. The upcoming FreeBSD 4.5 release will ship the corrected version of the UCD-SNMP / NET-SNMP package. In addition, the corrected version of the packages is available from the FreeBSD mirrors. FreeBSD has issued the following FreeBSD Security Advisory regarding the UCD-SNMP / NET-SNMP package: ftp://ftp.freebsd.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-02:09. snmp.asc. Hewlett-Packard Company SUMMARY - known vulnerable: ======================================== hp procurve switch 2524 NNM (Network Node Manager) JetDirect Firmware (Older versions only) HP-UX Systems running snmpd or OPENVIEW MC/ServiceGuard EMS Still under investigation: SNMP/iX (MPE/iX) ======================================== _________________________________________________________ --------------------------------------------------------- hp procurve switch 2524 --------------------------------------------------------- hp procurve switch 2525 (product J4813A) is vulnerable to some issues, patches in process. Watch for the associated HP Security Bulletin. --------------------------------------------------------- NNM (Network Node Manager) --------------------------------------------------------- Some problems were found in NNM product were related to trap handling. Patches in process. Watch for the associated HP Security Bulletin. --------------------------------------------------------- JetDirect Firmware (Older versions only) --------------------------------------------------------- ONLY some older versions of JetDirect Firmware are vulnerable to some of the issues. The older firmware can be upgraded in most cases, see list below. JetDirect Firmware Version State ========================== ===== X.08.32 and higher NOT Vulnerable X.21.00 and higher NOT Vulnerable JetDirect Product Numbers that can be freely upgraded to X.08.32 or X.21.00 or higher firmware. EIO (Peripherals Laserjet 4000, 5000, 8000, etc...) J3110A 10T J3111A 10T/10B2/LocalTalk J3112A Token Ring (discontinued) J3113A 10/100 (discontinued) J4169A 10/100 J4167A Token Ring MIO (Peripherals LaserJet 4, 4si, 5si, etc...) J2550A/B 10T (discontinued) J2552A/B 10T/10Base2/LocalTalk (discontinued) J2555A/B Token Ring (discontinued) J4100A 10/100 J4105A Token Ring J4106A 10T External Print Servers J2591A EX+ (discontinued) J2593A EX+3 10T/10B2 (discontinued) J2594A EX+3 Token Ring (discontinued) J3263A 300X 10/100 J3264A 500X Token Ring J3265A 500X 10/100 ---------------------------------------------------------- HP-UX Systems running snmpd or OPENVIEW ---------------------------------------------------------- The following patches are available now: PHSS_26137 s700_800 10.20 OV EMANATE14.2 Agent Consolidated Patch PHSS_26138 s700_800 11.X OV EMANATE14.2 Agent Consolidated Patch PSOV_03087 EMANATE Release 14.2 Solaris 2.X Agent Consolidated Patch All three patches are available from: http://support.openview.hp.com/cpe/patches/ In addition PHSS_26137 and PHSS_26138 will soon be available from: http://itrc.hp.com ================================================================ NOTE: The patches are labeled OV(Open View). However, the patches are also applicable to systems that are not running Open View. ================================================================= Any HP-UX 10.X or 11.X system running snmpd or snmpdm is vulnerable. To determine if your HP-UX system has snmpd or snmpdm installed: swlist -l file | grep snmpd If a patch is not available for your platform or you cannot install an available patch, snmpd and snmpdm can be disabled by removing their entries from /etc/services and removing the execute permissions from /usr/sbin/snmpd and /usr/sbin/snmpdm. ---------------------------------------------------------------- Investigation completed, systems vulnerable. ---------------------------------------------------------------- MC/ServiceGuard Event Monitoring System (EMS) ---------------------------------------------------------------- Still under investigation: ---------------------------------------------------------------- SNMP/iX (MPE/iX) Hirschmann Electronics GmbH & Co. KG Hirschmann Electronics GmbH & Co. KG supplies a broad range of networking products, some of which are affected by the SNMP vulnerabilities identified by CERT Coordination Center. The manner in which they are affected and the actions required to avoid being impacted by exploitation of these vulnerabilities, vary from product to product. Hirschmann customers may contact our Competence Center (phone +49-7127-14-1538, email: ans-support@nt.hirschmann.de) for additional information, especially regarding availability of latest firmware releases addressing the SNMP vulnerabilities. IBM Corporation Based upon the results of running the test suites we have determined that our version of SNMP shipped with AIX is NOT vulnerable. Innerdive Solutions, LLC Innerdive Solutions, LLC has two SNMP based products: 1. The "SNMP MIB Scout" (http://www.innerdive.com/products/mibscout/) 2. The "Router IP Console" (http://www.innerdive.com/products/ric/) The "SNMP MIB Scout" is not vulnerable to either bug. The "Router IP Console" releases prior to 3.3.0.407 are vulnerable. The release of "Router IP Console" correcting the behavior outlined in OUSPG#0100 is 3.3.0.407 and is already available on our site. Also, we will notify all our customers about this new release no later than March 5, 2002. Juniper Networks This is in reference to your notification regarding CAN-2002-0012 and CAN-2002-0013. Juniper Networks has reproduced this behavior and coded a software fix. The fix will be included in all releases of JUNOS Internet software built after January 5, 2002. Customers with current support contracts can download new software with the fix from Juniper's web site at www.juniper.net. Note: The behavior described in CAN-2002-0012 and CAN-2002-0013 can only be reproduced in JUNOS Internet software if certain tracing options are enabled. These options are generally not enabled in production routers. Lantronix, Inc. Lantronix is committed to resolving security issues with our products. The SNMP security bug you reported has been fixed in LRS firmware version B1.3/611(020123). Lotus Development Corporation Lotus Software evaluated the Lotus Domino Server for vulnerabilities using the test suite materials provided by OUSPG. This problem does not affect default installations of the Domino Server. However, SNMP agents can be installed from the CD to provide SNMP services for the Domino Server (these are located in the /apps/sysmgmt/agents directory). The optional platform specific master and encapsulator agents included with the Lotus Domino SNMP Agents for HP-UX and Solaris have been found to be vulnerable. For those platforms, customers should upgrade to version R5.0.1 a of the Lotus Domino SNMP Agents, available for download from the Lotus Knowledge Base on the IBM Support Web Site (http://www.ibm.com/software/lotus/support/). Please refer to Document #191059, "Lotus Domino SNMP Agents R5.0.1a", also in the Lotus Knowledge Base, for more details. LOGEC Systems Inc The products from LOGEC Systems are exposed to SNMP only via HP OpenView. We do not have an implementation of SNMP ourselves. As such, there is nothing in our products that would be an issue with this alert. Lucent Lucent is aware of reports that there is a vulnerability in certain implementations of the SNMP (Simple Network Management Protocol) code that is used in data switches and other hardware throughout the telecom industry. As soon as we were notified by CERT, we began assessing our product portfolio and notifying customers with products that might be affected. Our 5ESS switch and most of our optical portfolio were not affected. Our core and edge ATM switches and most of our edge access products are affected, but we have developed, tested, and deployed fixes for many of those products to our customers. Fixes for the rest of the affected product portfolio will be available shortly. We consider the security and reliability of our customers' networks to be one of our critical measures of success. We take every reasonable measure to ensure their satisfaction. In addition, we are working with customers on ways to further enhance the security they have in place today. Marconi Marconi supplies a broad range of telecommunications and related products, some of which are affected by the SNMP vulnerabilities identified here. The manner in which they are affected and the actions required (if any) to avoid being impacted by exploitation of these vulnerabilities, vary from product to product. Those Marconi customers with support entitlement may contact the appropriate Technical Assistance Center (TAC) for additional information. Those not under support entitlement may contact their sales representative. Microsoft Corporation The Microsoft Security Reponse [sic] Center has investigated this issue, and provides the following information. Summary: All Microsoft implementations of SNMP v1 are affected by the vulnerability. The SNMP v1 service is not installed or running by default on any version of Windows. A patch is underway to eliminate the vulnerability. In the meantime, we recommend that affected customers disable the SNMP v1 service. Details: An SNMP v1 service ships on the CDs for Windows 95, 98, and 98SE. It is not installed or running by default on any of these platforms. An SNMP v1 is NOT provided for Windows ME. However, it is possible that Windows 98 machines which had the service installed and were upgraded would still have the service. Since SNMP is not supported for WinME, customers in this situation are urged to remove the SNMP service. An SNMP v1 service is available on Windows NT 4.0 (including Terminal Server Edition) and Windows 2000 but is not installed or running by default on any of these platforms.Windows XP does not ship with an SNMP v1 service. Remediation: A patch is underway for the affected platforms, and will be released shortly. In the meantime, Microsoft recommends that customers who have the SNMP v1 service running disable it to protect their systems. Following are instruction for doing this: Windows 95, 98 and 98SE: 1. In Control Panel, double-click Network. 2. On the Configuration tab, select Microsoft SNMP Agent from the list of installed components. 3. Click Remove Check the following keys and confirm that snmp.exe is not listed. HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunSer vices HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run For Windows XP: 1. Right-click on My Computer and select Manage 2. Click on Services and Applications, then on Services 3. Location SNMP on the list of services, then select it and click Stop. 4. Select Startup, and click Disabled. 5. Click OK to close the dialoge [sic], then close the Computer Management window. For Windows NT 4.0 (including Terminal Server Edition): 1. Select Start, then Settings. 2. Select Control Panel, then click on the Services Icon 3. Locate SNMP on the list of services, then select it and click Stop. 4. Select Startup, and click Disabled. 5. Click OK to close the dialoge [sic], then close Control Panel Windows 2000: 1. Right-click on My Computer and select Manage 2. Click on Services and Applications, then on Services 3. Location SNMP on the list of services, then select it and click Stop. 4. Select Startup, and click Disabled. 5. Click OK to close the dialoge [sic], then close the Computer Management window. Multinet MultiNet and TCPware customers should contact Process Software to check for the availability of patches for this issue. A couple of minor problems were found and fixed, but there is no security risk related to the SNMP code included with either product. Netaphor NETAPHOR SOFTWARE INC. is the creator of Cyberons for Java -- SNMP Manager Toolkit and Cyberons for Java -- NMS Application Toolkit, two Java based products that may be affected by the SNMP vulnerabilities identified here. The manner in which they are affected and the actions required (if any) to avoid being impacted by exploitation of these vulnerabilities, may be obtained by contacting Netaphor via email at info@netaphor.com Customers with annual support may contact support@netaphor.com directly. Those not under support entitlement may contact Netaphor sales: sales@netaphor.com or (949) 470 7955 in USA. NetBSD NetBSD does not ship with any SNMP tools in our 'base' releases. We do provide optional packages which provide various support for SNMP. These packages are not installed by default, nor are they currently provided as an install option by the operating system installation tools. A system administrator/end-user has to manually install this with our package management tools. These SNMP packages include: + netsaint-plugin-snmp-1.2.8.4 (SNMP monitoring plug-in for netsaint) + p5-Net-SNMP-3.60 (perl5 module for SNMP queries) + p5-SNMP-3.1.0 (Perl5 module for interfacing to the UCD SNMP library + p5-SNMP_Session-0.83 (perl5 module providing rudimentary access to remote SNMP agents) + ucd-snmp-4.2.1 (Extensible SNMP implementation) (conflicts with ucd-snmp-4.1.2) + ucd-snmp-4.1.2 (Extensible SNMP implementation) (conflicts with ucd-snmp-4.2.1) We do provide a software monitoring mechanism called 'audit-packages', which allows us to highlight if a package with a range of versions has a potential vulnerability, and recommends that the end-user upgrade the packages in question. Netscape Communications Corporation Netscape continues to be committed to maintaining a high level of quality in our software and service offerings. Part of this commitment includes prompt response to security issues discovered by organizations such as the CERT Coordination Center. According to a recent CERT/CC advisory, The Oulu University Secure Programming Group (OUSPG) has reported numerous vulnerabilities in multiple vendor SNMPv1 implementations. These vulnerabilities may allow unauthorized privileged access, denial of service attacks, or unstable behavior. We have carefully examined the reported findings, performing the tests suggested by the OUSPG to determine whether Netscape server products were subject to these vulnerabilities. It was determined that several products fell into this category. As a result, we have created fixes which will resolve the issues, and these fixes will appear in future releases of our product line. To Netscape's knowledge, there are no known instances of these vulnerabilities being exploited and no customers have been affected to date. When such security warnings are issued, Netscape has committed to - and will continue to commit to - resolving these issues in a prompt and timely fashion, ensuring that our customers receive products of the highest quality and security. NET-SNMP All ucd-snmp version prior to 4.2.2 are susceptible to this vulnerability and users of versions prior to version 4.2.2 are encouraged to upgrade their software as soon as possible (http://www.net-snmp.org/download/). Version 4.2.2 and higher are not susceptible. Network Associates PGP is not affected, impacted, or otherwise related to this VU#. Network Computing Technologies Network Computing Technologies has reviewed the information regarding SNMP vulnerabilities and is currently investigating the impact to our products. Nokia This vulnerability is known to affect IPSO versions 3.1.3, 3.3, 3.3.1, 3.4, and 3.4.1. Patches are currently available for versions 3.3, 3.3.1, 3.4 and 3.4.1 for download from the Nokia website. In addition, version 3.4.2 shipped with the patch incorporated, and the necessary fix will be included in all future releases of IPSO. We recommend customers install the patch immediately or follow the recommended precautions below to avoid any potential exploit. If you are not using SNMP services, including Traps, simply disable the SNMP daemon to completely eliminate the potential vulnerability. If you are using only SNMP Traps and running Check Point FireWall-1, create a firewall policy to disallow incoming SNMP messages on all appropriate interfaces. Traps will continue to work normally. Nortel Networks The CERT Coordination Center has issued a broad based alert to the technology industry, including Nortel Networks, regarding potential security vulnerabilities identified in the Simple Network Management Protocol (SNMP), a common networking standard. The company is working with CERT and other network equipment manufacturers, the U.S. Government, service providers, and software suppliers to assess and address this issue. Novell Novell ships SNMP.NLM and SNMPLOG.NLM with NetWare 4.x, NetWare 5.x and 6.0 systems. The SNMP and SNMPLOG vulnerabilities detected on NetWare are fixed and will be available through NetWare 6 Support Pack 1 & NetWare 5.1 Support Pack 4. Support packs are available at http://support.novell.com/tools/csp/ OpenBSD OpenBSD does not ship SNMP code. Qualcomm WorldMail does not support SNMP by default, so customers who run unmodified installations are not vulnerable. Redback Networks, Inc. Redback Networks, Inc. has identified that the vulnerability in question affects certain versions of AOS software on the SMS 500, SMS 1800, and SMS 10000 platforms, and is taking the appropriate steps necessary to correct the issue. Red Hat RedHat has released a security advisiory [sic] at http://www.redhat.com/support/errata/RHSA-2001-163.html with updated versions of the ucd-snmp package for all supported releases and architectures. For more information or to download the update please visit this page. SGI SGI acknowledges the SNMP vulnerabilities reported by CERT and is currently investigating. No further information is available at this time. For the protection of all our customers, SGI does not disclose, discuss or confirm vulnerabilities until a full investigation has occurred and any necessary patch(es) or release streams are available for all vulnerable and supported IRIX operating systems. Until SGI has more definitive information to provide, customers are encouraged to assume all security vulnerabilities as exploitable and take appropriate steps according to local site security policies and requirements. As further information becomes available, additional advisories will be issued via the normal SGI security information distribution methods including the wiretap mailing list on http://www.sgi.com/support/security/. SNMP Research International SNMP Research has made the following vendor statement. They are likely to revise and expand the statement as the date for the public vulnerability announcement draws nearer. The most recent releases (15.3.1.7 and above) of all SNMP Research products address the vulnerabilities identified in the following CERT vulnerability advisories: VU#854306 (Multiple vulnerabilities in SNMPv1 request handling) VU#107186 (Multiple vulnerabilities in SNMPv1 trap handling) All customers who maintain a support contract have received either this release or appropriate patch sets to their 15.3 source code releases addressing these vulnerabilities. Users maintaining earlier releases should update to the current release if they have not already done so. Up-to-date information is available from support@snmp.com. Stonesoft Stonesoft's StoneGate product does not include an SNMP agent, and is therefore not vulnerable to this. Other Stonesoft's products are still under investigation. As further information becomes available, additional advisories will be available at http://www.stonesoft.com/support/techcenter/ Sun Microsystems, Inc. Sun's SNMP product, Solstice Enterprise Agents (SEA), described here: http://www.sun.com/solstice/products/ent.agents/ is affected by VU#854306 but not VU#107186. More specifically the main agent of SEA, snmpdx(1M), is affected on Solaris 2.6, 7, 8. Sun is currently generating patches for this issue and will be releasing a Sun Security Bulletin once the patches are available. The bulletin will be available from: http://sunsolve.sun.com/security. Sun patches are available from: http://sunsolve.sun.com/securitypatch. Symantec Corporation Symantec Corporation has investigated the SNMP issues identified by the OUSPG test suite and determined that Symantec products are not susceptable [sic] to these issues. TANDBERG Tandberg have run all the testcases found the PROTOS test-suie [sic], c06snmpv1: 1. c06-snmpv1-trap-enc-pr1.jar 2. c06-snmpv1-treq-app-pr1.jar 3. c06-snmpv1-trap-enc-pr1.jar 4. c06-snmpv1-req-app-pr1.jar The tests were run with standard delay time between the requests (100ms), but also with a delay of 1ms. The tests applies to all TANDBERG products (T500, T880, T1000, T2500, T6000 and T8000). The software tested on these products were B4.0 (our latest software) and no problems were found when running the test suite. Tivoli Systems Our analysis indicates that this vulnerability does not affect the Tivoli NetView product. Appendix B. - References 1. http://www.ee.oulu.fi/research/ouspg/protos/ 2. http://www.kb.cert.org/vuls/id/854306 3. http://www.kb.cert.org/vuls/id/107186 4. http://www.cert.org/tech_tips/denial_of_service.html 5. http://www.ietf.org/rfc/rfc1067.txt 6. http://www.ietf.org/rfc/rfc1089.txt 7. http://www.ietf.org/rfc/rfc1140.txt 8. http://www.ietf.org/rfc/rfc1155.txt 9. http://www.ietf.org/rfc/rfc1156.txt 10. http://www.ietf.org/rfc/rfc1215.txt 11. http://www.ietf.org/rfc/rfc1270.txt 12. http://www.ietf.org/rfc/rfc1352.txt Appendix C. - Background Information Background Information on the OUSPG OUSPG is an academic research group located at Oulu University in Finland. The purpose of this research group is to test software for vulnerabilities. History has shown that the techniques used by the OUSPG have discovered a large number of previously undetected problems in the products and protocols they have tested. In 2001, the OUSPG produced a comprehensive test suite for evaluating implementations of the Lightweight Directory Access Protocol (LDAP). This test suite was developed with the strategy of abusing the protocol in unsupported and unexpected ways, and it was very effective in uncovering a wide variety of vulnerabilities across several products. This approach can reveal vulnerabilities that would not manifest themselves under normal conditions. After completing its work on LDAP, OUSPG moved its focus to SNMPv1. As with LDAP, they designed a custom test suite, began testing a selection of products, and found a number of vulnerabilities. Because OUSPG's work on LDAP was similar in procedure to its current work on SNMP, you may wish to review the LDAP Test Suite and CERT Advisory CA-2001-18, which outlined results of application of the test suite. In order to test the security of protocols like SNMPv1, the PROTOS project presents a server with a wide variety of sample packets containing unexpected values or illegally formatted data. As a member of the PROTOS project consortium, the OUSPG used the PROTOS c06-snmpv1 test suite to study several implementations of the SNMPv1 protocol. Results of the test suites run against SNMP indicate that there are many different vulnerabilities on many different implementations of SNMP. Background Information on the Simple Network Management Protocol The Simple Network Management Protocol (SNMP) is the most popular protocol in use to manage networked devices. SNMP was designed in the late 80's to facilitate the exchange of management information between networked devices, operating at the application layer of the ISO/OSI model. The SNMP protocol enables network and system administrators to remotely monitor and configure devices on the network (devices such as switches and routers). Software and firmware products designed for networks often make use of the SNMP protocol. SNMP runs on a multitude of devices and operating systems, including, but not limited to, + Core Network Devices (Routers, Switches, Hubs, Bridges, and Wireless Network Access Points) + Operating Systems + Consumer Broadband Network Devices (Cable Modems and DSL Modems) + Consumer Electronic Devices (Cameras and Image Scanners) + Networked Office Equipment (Printers, Copiers, and FAX Machines) + Network and Systems Management/Diagnostic Frameworks (Network Sniffers and Network Analyzers) + Uninterruptible Power Supplies (UPS) + Networked Medical Equipment (Imaging Units and Oscilloscopes) + Manufacturing and Processing Equipment The SNMP protocol is formally defined in RFC1157. Quoting from that RFC: Implicit in the SNMP architectural model is a collection of network management stations and network elements. Network management stations execute management applications which monitor and control network elements. Network elements are devices such as hosts, gateways, terminal servers, and the like, which have management agents responsible for performing the network management functions requested by the network management stations. The Simple Network Management Protocol (SNMP) is used to communicate management information between the network management stations and the agents in the network elements. Additionally, SNMP is discussed in a number of other RFC documents: + RFC 3000 Internet Official Protocol Standards + RFC 1212 Concise MIB Definitions + RFC 1213 Management Information Base for Network Management of TCP/IP-based Internets: MIB-II + RFC 1215 A Convention for Defining Traps for use with the SNMP + RFC 1270 SNMP Communications Services + RFC 2570 Introduction to Version 3 of the Internet-standard Network Management Framework + RFC 2571 An Architecture for Describing SNMP Management Frameworks + RFC 2572 Message Processing and Dispatching for the Simple Network Management Protocol (SNMP) + RFC 2573 SNMP Applications + RFC 2574 User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3) + RFC 2575 View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP) + RFC 2576 Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework _____________________________________________________________ The CERT Coordination Center thanks the Oulu University Secure Programming Group for reporting these vulnerabilities to us, for providing detailed technical analyses, and for assisting us in preparing this advisory. We also thank Steven M. Bellovin (AT&T Labs -- Research), Wes Hardaker (Net-SNMP), Steve Moulton (SNMP Research), Tom Reddington (Bell Labs), Mike Duckett (Bell South), Rob Thomas, Blue Boar (Thievco), and the many others who contributed to this document. _____________________________________________________________ Feedback on this document can be directed to the authors, Ian A. Finlay, Shawn V. Hernan, Jason A. Rafail, Chad Dougherty, Allen D. Householder, Marty Lindner, and Art Manion. __________________________________________________________________ This document is available from: http://www.cert.org/advisories/CA-2002-03.html __________________________________________________________________ CERT/CC Contact Information Email: cert@cert.org Phone: +1 412-268-7090 (24-hour hotline) Fax: +1 412-268-6989 Postal address: CERT Coordination Center Software Engineering Institute Carnegie Mellon University Pittsburgh PA 15213-3890 U.S.A. CERT/CC personnel answer the hotline 08:00-17:00 EST(GMT-5) / EDT(GMT-4) Monday through Friday; they are on call for emergencies during other hours, on U.S. holidays, and on weekends. Using encryption We strongly urge you to encrypt sensitive information sent by email. Our public PGP key is available from http://www.cert.org/CERT_PGP.key If you prefer to use DES, please call the CERT hotline for more information. Getting security information CERT publications and other security information are available from our web site http://www.cert.org/ To subscribe to the CERT mailing list for advisories and bulletins, send email to majordomo@cert.org. Please include in the body of your message subscribe cert-advisory * "CERT" and "CERT Coordination Center" are registered in the U.S. Patent and Trademark Office. __________________________________________________________________ NO WARRANTY Any material furnished by Carnegie Mellon University and the Software Engineering Institute is furnished on an "as is" basis. Carnegie Mellon University makes no warranties of any kind, either expressed or implied as to any matter including, but not limited to, warranty of fitness for a particular purpose or merchantability, exclusivity or results obtained from use of the material. Carnegie Mellon University does not make any warranty of any kind with respect to freedom from patent, trademark, or copyright infringement. _____________________________________________________________ Conditions for use, disclaimers, and sponsorship information Copyright 2002 Carnegie Mellon University. Revision History February 12, 2002: Initial release -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.8 iQCVAwUBPGltxKCVPMXQI2HJAQGVeAQAuHtxGBsmU5HI6PtqhpZ1rkpV+Cq3ChIU R1FUz4Zi2vzklH8jdXd10KqwZAPhXTPazeguhRyLVSUprMlSKqcXg3BCkH/y4WAl QUZ1VnQXMnMrxIJO1fv0WW0pcyM4W0iQBl0kCIlawPcjCGVniOCOr+4CE0f923wr uZiMJ5f2SEo= =h42e -----END PGP SIGNATURE----- ----- End forwarded message ----- -- Florian Lohoff flo@rfc822.org +49-5201-669912 Nine nineth on september the 9th Welcome to the new billenium