Tulip NW-Treiber und DECchip 21142/43 (rev65)

Frank Baurichter frank at baurichter.net
Mon Jan 13 21:27:02 CET 2003 

Florian Lohoff schrieb:
> 
> Es waere interessant ob deine IDE Platten ueberhaupt als UDMA laufen.
> 
> schick doch mal nen dmesg und hdparm -i /dev/hdX

Hängt hinten dran.
apt-get install hdparm war nötig.
Debian ist einfach obergeil!

Gruß

Frank

-- 
        IBB     Dipl.-Ing. (FH) Frank Baurichter
Griepshop 20                        Tel: +49(0)5734/5738
32479 Rothenuffeln                  Fax: +49(0)5734/5619
Antriebstechnik  Steuerungstechnik Prozessvisualisierung

Unser Standort:     http://mail.map24.com/ibb-home
-------------- next part --------------
Linux version 2.4.18 (root at nathan) (gcc version 2.95.4 20011002 (Debian prerelease)) #4 Sat Jan 11 18:03:40 CET 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
 BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
 BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 98288
zone(0): 4096 pages.
zone(1): 94192 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 501.149 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 999.42 BogoMIPS
Memory: 384548k/393152k available (1214k kernel code, 8216k reserved, 403k data, 224k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU:     After generic, caps: 008021bf 808029bf 00000000 00000002
CPU:             Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0596] at 00:07.0
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTLA-305040, ATA DISK drive
hdb: MAXTOR 4K080H4, ATA DISK drive
hdc: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 80418240 sectors (41174 MB) w/380KiB Cache, CHS=5005/255/63
hdb: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=9729/255/63
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
 hdb: hdb1
Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: Detected Via MVP3 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on VIA MVP3 @ 0xe0000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 9 for device 00:0c.0
PCI: Sharing IRQ 9 with 00:0a.0
sym53c8xx: at PCI bus 0, device 12, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected 
sym53c875-0: rev 0x26 on pci bus 0 device 12 function 0 irq 9
sym53c875-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3c-20010512
  Vendor: HP        Model: C5683A            Rev: C908
  Type:   Sequential-Access                  ANSI SCSI revision: 02
  Vendor: PIONEER   Model: CD-ROM DR-U16S    Rev: 1.01
  Type:   CD-ROM                             ANSI SCSI revision: 02
es1371: version v0.30 time 18:07:38 Jan 11 2003
PCI: Found IRQ 9 for device 00:0b.0
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
es1371: found es1371 rev 8 at io 0xe000 irq 9
es1371: features: joystick 0x0
ac97_codec: AC97  codec, id: 0x5452:0x4123 (TriTech TR A5)
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 224k freed
Adding Swap: 96384k swap-space (priority -1)
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
PCI: Found IRQ 5 for device 00:09.0
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip0:  MII transceiver #17 config 1000 status 782d advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at 0xd800, 00:40:F4:46:B5:FA, IRQ 5.
PCI: Found IRQ 9 for device 00:0a.0
PCI: Sharing IRQ 9 with 00:0c.0
tulip1:  EEPROM default media type Autosense.
tulip1:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
tulip1:  MII transceiver #17 config 1000 status 782d advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at 0xdc00, 00:40:F4:46:B8:37, IRQ 9.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack (3071 buckets, 24568 max)
eth0: Setting full-duplex based on MII#17 link partner capability of 45e1.
eth1: Setting full-duplex based on MII#17 link partner capability of 45e1.
-------------- next part --------------

/dev/hdc:

 Model=LG DVD-ROM DRD-8160B, FwRev=1.00, SerialNo=
 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=0kB, MaxMultSect=0
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:150}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2 
 AdvancedPM=no

-------------- next part --------------

/dev/hdb:

 Model=MAXTOR 4K080H4, FwRev=A08.1500, SerialNo=674207500238
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
 BuffType=DualPortCache, BuffSize=2000kB, MaxMultSect=16, MultSect=16
 CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=156301488
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 
 AdvancedPM=no WriteCache=enabled
 Drive Supports : ATA/ATAPI-5 T13 1321D revision 1 : ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 

-------------- next part --------------

/dev/hda:

 Model=IBM-DTLA-305040, FwRev=TW4OA68A, SerialNo=YJEYJ2F2787
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
 BuffType=DualPortCache, BuffSize=380kB, MaxMultSect=16, MultSect=16
 CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=80418240
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 udma5 
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive Supports : ATA/ATAPI-5 T13 1321D revision 1 : ATA-2 ATA-3 ATA-4 ATA-5

More information about the Linux mailing list