capi über ppp

Fri Jul 29 13:15:53 CEST 2005

Adam Jendrosek <AJendrosek at orga-systems.com> 
Sent by: linux-bounces at lug-owl.de
29.07.2005 12:37

To
linux at lug-owl.de
cc

Subject
capi über ppp

Hallo,

ich habe hier ein HP Compaq nc8000 Notebook mit einer FritzCard ISDN und 
Ubuntu Linux. 
Nun wuerde ich der Kiste beibringen, dass diese ueber den vorhandnen RAS 
(Bintec BIANCA Brick XM) die Einwahl ins Firmennetzwerk macht. 
Für die Einwahl verwende ich den pppd mit dem Capiplugin mittels  dem 
Aufruf pppd call isdn/foo

Leider bekomme ich keine IP zugewiesen, obwohl ich diese in der 
configdatei anfordere.

Anbei den Auszug des pppd und die configdatei

controller 1: listen_change_state 1 -> 0
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 

cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 

cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
ncci_change_state:0x10101 6 -> 7 event=10
ncci_change_state:0x10101 7 -> 0 event=13
plci_change_state:0x101 3 -> 7 event=8
capiplugin: "" -> "052516918870" outgoing (pcli=0x101/ncci=0x10101): 
charge in units: 1
DISCONNECT_IND reason 0x3400 (No additional information) for plci 0x101
plci_change_state:0x101 7 -> 8 event=9
plci_change_state:0x101 8 -> 0 event=11
capiplugin: disconnect(local): "" -> "052516918870" outgoing 
(pcli=0x101/ncci=0x10101) 0x3400 (0x3301) - No additional information
Connection terminated.
tcflush failed: Input/output error
capiplugin: phase disconnect (was dead).
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 

cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
capiplugin: exit
root at cosservice:/etc/ppp # f

-------------8<-----------------------------------------

debug
sync
noauth
-chap
user COS-Service-1
password xxx
plugin userpass.so
defaultroute
plugin capiplugin.so
#controller 1
#numberprefix 0
number 052516918870
protocol hdlc
/dev/null
nodetach
noipx
mtu 1500
nobsdcomp
nodeflate
ipcp-accept-local
ipcp-accept-remote
noipdefault
usepeerdns
novjccomp
novj

danke und gruss,
Adam

Hallo nochmal,

ich meinte natuerlich dieses Protokoll des pppd.

Gruss Adam

Plugin userpass.so loaded.
userpass: $Revision: 1.5 $
Plugin capiplugin.so loaded.
capiplugin: $Revision: 1.36 $
capiconn:  1.10
capiplugin: phase serialconn.
capiplugin: contr=1
capiplugin: contr=1
capiplugin: contr=1
capiplugin: contr=1
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
plci_change_state:0x0 0 -> 1 event=1
capiplugin: dialing 052516918870 (hdlc)
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
plci_change_state:0x101 1 -> 2 event=3
plci_change_state:0x101 2 -> 3 event=6
ncci_change_state:0x101 0 -> 1 event=1
ncci_change_state:0x10101 1 -> 3 event=3
ncci_change_state:0x10101 3 -> 4 event=7
ncci 0x10101 up
capiplugin: connected: "" -> "052516918870" outgoing 
(pcli=0x101/ncci=0x10101)
capiplugin: using /dev/capi/0: "" -> "052516918870" outgoing 
(pcli=0x101/ncci=0x10101)
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/capi/0
sent [LCP ConfReq id=0x1 <mru 1542> <asyncmap 0x0> <magic 0x65ee2df0>]
capiplugin: phase establish (was serialconn).
rcvd [LCP ConfReq id=0x1 <mru 1524> <auth chap MD5> <magic 0x475fb14b> 
<pcomp> <accomp>]
sent [LCP ConfRej id=0x1 <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <mru 1542> <asyncmap 0x0> <magic 0x65ee2df0>]
rcvd [LCP ConfReq id=0x2 <mru 1524> <auth chap MD5> <magic 0x56e6a5a2>]
sent [LCP ConfNak id=0x2 <auth chap MS-v2>]
rcvd [LCP ConfReq id=0x3 <mru 1524> <auth chap MS-v2> <magic 0xfb481dd0>]
sent [LCP ConfAck id=0x3 <mru 1524> <auth chap MS-v2> <magic 0xfb481dd0>]
sent [LCP EchoReq id=0x0 magic=0x65ee2df0]
capiplugin: phase authenticate (was establish).
rcvd [CHAP Challenge id=0x1 <f2c27f0cd1a3a9cddb342d2fcceaaea6>, name = 
"ORGA"]
sent [CHAP Response id=0x1 
<24732bb72a3ccd5126cc2dd30e45de390000000000000000f70d330dac817aceebd2dab7faa8c4e85a52908e722813a700>, 
name = "COS-Service-1"]
rcvd [LCP EchoRep id=0x0 magic=0xfb481dd0]
rcvd [CHAP Success id=0x1 "S=8CCED79BC6469DE885AD1BE4B1FF0D14BE6FDE5C"]
capiplugin: phase network (was authenticate).
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [LCP EchoReq id=0x1 magic=0x65ee2df0]
rcvd [LCP EchoRep id=0x1 magic=0xfb481dd0]
IPCP: timeout sending Config-Requests
capiplugin: phase terminate (was network).
capiplugin: phase establish (was terminate).
sent [LCP TermReq id=0x2 "No network protocols running"]
rcvd [LCP TermAck id=0x2]
capiplugin: phase dead (was establish).
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
ncci_change_state:0x10101 4 -> 6 event=12
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state state=0 event=3 ????
ncci_change_state:0x10101 6 -> 7 event=10
ncci_change_state:0x10101 7 -> 0 event=13
plci_change_state:0x101 3 -> 7 event=8
capiplugin: "" -> "052516918870" outgoing (pcli=0x101/ncci=0x10101): 
charge in units: 1
DISCONNECT_IND reason 0x3400 (No additional information) for plci 0x101
plci_change_state:0x101 7 -> 8 event=9
plci_change_state:0x101 8 -> 0 event=11
capiplugin: disconnect(local): "" -> "052516918870" outgoing 
(pcli=0x101/ncci=0x10101) 0x3400 (0x3301) - No additional information
Connection terminated.
tcflush failed: Input/output error
capiplugin: phase disconnect (was dead).
controller 1: listen_change_state 0 -> 1
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
controller 1: listen_change_state state=1 event=1 ????
contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 
cipmask=0x0 capimask2=0x0
controller 1: listen_change_state 1 -> 0
capiplugin: exit
-- 
Linux mailing list Linux at lug-owl.de
subscribe/unsubscribe: http://lug-owl.de/cgi-bin/mailman/listinfo/linux
Hinweise zur Nutzung: http://www.lug-owl.de/Mailingliste/hints.epo