Linux Digest, Vol 34, Issue 5

Joern Eisenkraetzer aed at aed-dresden.de
Tue Feb 7 13:47:46 CET 2006


zu Message: 2

Hallo Markus und danke fuer Deine Bemuehungen.
Ich nutze Mandriva2006 (bin irgendwann mal von Debian dahingewechselt ;-) , 
finde ich fuer den Desktop prima vorkonfiguriert .. )

Nach wie vor habe ich die Schluesselproblem. Habe beide Varianten probiert, 
d.h. mit "xxx" und dies verschlüsselt (wpa_passphrase ssid xxx), immer kreist 
die Konsolenmeldung (bis Strg+C) und bemeckert den Schluessel:

--- schnipp ---
Initializing interface 'eth0' conf '/etc/wpa_supplicant.conf' driver 'prism54'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
opensc_engine_path='/usr/lib/opensc/engine_opensc.so'
pkcs11_engine_path='/usr/lib/opensc/engine_pkcs11.so'
pkcs11_module_path='/usr/lib/pkcs11/opensc-pkcs11.so'
Priority group 6
   id=0 ssid='Galaxy'
Initializing interface (2) 'eth0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
ioctl[SIOCSIWPMKSA]: Operation not supported
SIOCGIWRANGE: WE(compiled)=18 WE(source)=16 enc_capa=0x0
  capabilities: key_mgmt 0x0 enc 0x3
Own MAC address: 00:90:4b:2b:6f:90
wpa_driver_prism54_set_countermeasures - not yet implemented
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=74
Custom wireless event: 'Received a beacon from an unkown AP to 
00:11:50:58:A8:49  (00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=76
Custom wireless event: 'Authenticate request (ex) to 00:11:50:58:A8:49  : 
ACCEPTED  (00)'
Wireless event: cmd=0x8c02 len=76
Custom wireless event: 'Authenticate request (ex) to 00:11:50:58:A8:49  : 
ACCEPTED  (00)'
Scan timeout - try to get results
Received 145 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 6
0: 00:11:50:58:a8:49 ssid='Galaxy' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected
Trying to associate with 00:11:50:58:a8:49 (SSID='Galaxy' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 04 01 
00 00 50 f2 04 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 
f2 04 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b04 len=12
Wireless event: cmd=0x8b1a len=19
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=76
Custom wireless event: 'Authenticate request (ex) to 00:11:50:58:A8:49  : 
ACCEPTED  (00)'
Wireless event: cmd=0x8c02 len=76
Custom wireless event: 'Authenticate request (ex) to 00:11:50:58:A8:49  : 
ACCEPTED  (00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=67
Custom wireless event: 'Received a probe from client to 00:11:50:58:A8:49  
(00)'
Wireless event: cmd=0x8c02 len=76
Custom wireless event: 'Authenticate request (ex) to 00:11:50:58:A8:49  : 
ACCEPTED  (00)'
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:00:00:00:00:00 into blacklist
State: ASSOCIATING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_prism54_set_countermeasures - not yet implemented
--- schnapp ---


Das Modul aes habe ich geladen, habe ich irgend'was vergessen ?
Viele Gruesse
Joern Eisenkraetzer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lug-owl.de/pipermail/linux/attachments/20060207/a66a1914/attachment.sig>


More information about the Linux mailing list