3com -pcmcia
Olaf Hansen
donolafo at t-online.de
Wed Mar 22 19:11:25 CET 2006
>
> Message: 3
> Date: Tue, 21 Mar 2006 18:15:59 +0100
> From: Jan-Benedict Glaw <jbglaw at lug-owl.de>
> Subject: Re: 3com-pcmcia unter SuSE 64bit
> To: linux at lug-owl.de
> Also...
>
> "Ein Ping funktioniert" -- aber wohin denn?
> "trotzdem kann kein Client erreicht werden" -- wer versucht denn was?
>
> Insofern wären die Ausgeben folgender Befehle hilfreich:
>
> /sbin/ifconfig -a
> cat /etc/resolv.conf
> /sbin/route -n
>
> ...und dann natürlich eine Kostprobe von dem ping sowie eine von "dem
> Client, der nicht erreicht werden kann." Wenn sich daraus nichts
> ergibt, wird nochmal ein tcpdump fällig, aber dazu mehr, wenn es
> soweit ist.
>
> MfG, JBG
> ...um das noch zu ergänzen: Du hast ja ein 64bit-System, kannst Du die
> `dmesg'-Ausgaben bitte auch noch dazupacken?
>
> MfG, JBG
>
Danke schon mal für deine Zeit :)
Bin mal gespannt, was bei mir los ist.
Das Systemprotokoll ist eeetwas lang,
ich habe es noch nicht eigefügt.
Grüsse,
Olaf
/sbin/ifconfig -a :
eth1 Protokoll:Ethernet Hardware Adresse 00:60:08:E9:E1:90
inet Adresse:192.168.201.10 Bcast:192.168.201.255
Maske:255.255.255.0
inet6 Adresse: fe80::260:8ff:fee9:e190/64
Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:80 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:2475030
collisions:0 Sendewarteschlangenlänge:1000
RX bytes:19920 (19.4 Kb) TX bytes:0 (0.0 b)
Interrupt:177 Basisadresse:0x300
olaf10h1:/home/olaf # cat /etc/resolv.conf
nameserver 192.168.201.7
search haus1.de
olaf10h1:/home/olaf # /sbin/route -n
Kernel IP Routentabelle
Ziel Router Genmask Flags Metric Ref Use Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.201.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
Ping auf den Netzwerkdrucker ergibt:
ping 192.168.201.98
PING 192.168.201.98 (192.168.201.98) 56(84) bytes of data.
From 192.168.201.10: icmp_seq=1 Destination Host Unreachable
From 192.168.201.10 icmp_seq=1 Destination Host Unreachable
Ein ping von anderen Clients ergibt dasselbe.
Eine U10 mit Solaris10 sagt mir: no answer from 192.168.201.10
Ein ping auf sich selbst bringt ein positives Ergebnis. Das hatte ich getan da
ich hoffte so zu erfahren, ob die Karte überhaupt reagiert.
Welcher Client versucht was? Ich versuche, von dem Notebook auf den
Netzwerkdrucker und NFS-Verzeichnisse zuzugreifen.
Das Notebook selber bietet keine Dienste an.
dmesg?
Hier sind sie:
Password:
olaf10h1:/home/olaf # dmesg
Bootdata ok (command line is root=/dev/hda4 vga=0x317 selinux=0
resume=/dev/h
da3 splash=silent)
Linux version 2.6.13-15.8-default (geeko at buildhost) (gcc version 4.0.2
20050901
(prerelease) (SUSE Linux)) #1 Tue Feb 7 11:07:24 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001bea0000 (usable)
BIOS-e820: 000000001bea0000 - 000000001beaf000 (ACPI data)
BIOS-e820: 000000001beaf000 - 000000001bf00000 (ACPI NVS)
BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7ee0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
0x000000001beaa49
f
ACPI: FADT (v001 FUJ W37 0x06040000 W37 0x000f4240) @
0x000000001beaedd
e
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @
0x000000001beaee5
2
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x00000000
1beaef6a
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @
0x000000001beaefc
4
ACPI: DSDT (v001 FUJ W37 0x06040000 MSFT 0x0100000e) @
0x000000000000000
0
On node 0 totalpages: 114235
DMA zone: 3995 pages, LIFO batch:1
Normal zone: 110240 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
ATI board detected. Disabling timer pin 1.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Checking aperture...
CPU 0: aperture @ 0 size 32 MB
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/hda4 vga=0x317 selinux=0 resume=/dev/hda3
spl
ash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 800.029 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 443116k/457344k available (2291k kernel code, 13532k reserved, 827k
data
, 176k init)
Calibrating delay using timer specific routine.. 1603.60 BogoMIPS
(lpj=3207217)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
mtrr: v2.0 (20020519)
CPU: Mobile AMD Athlon(tm) 64 Processor 3400+ stepping 02
checking if image is initramfs... it is
ACPI: Looking for DSDT in initrd... not found!
not found!
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 3)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev at vger.kernel.org cc hadi at cyberus.ca)
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: d0100000-d01fffff
PREFETCH window: d4000000-d7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:09.0
IO window: 00002000-00002fff
IO window: 00003000-00003fff
PREFETCH window: 20000000-21ffffff
MEM window: 22000000-23ffffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: d0200000-d02fffff
PREFETCH window: 20000000-21ffffff
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 177
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1143046339.800:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xd4000000, mapped to 0xffffc20000080000, using 6144k,
to
tal 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011
byt
es,<6>...found (1024x768, 12703 bytes, v3).
Console: switching to colour frame buffer device 127x44
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
ACPI: PCI interrupt for device 0000:00:14.6 disabled
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
ACPI wakeup devices:
LID0 SLPB P2P MODM
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 176k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: FUJITSU MHT2080AT, ATA DISK drive
input: AT Translated Set 2 keyboard on isa0060/serio0
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 > hda3 hda4
Probing IDE interface ide1...
hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: Thermal Zone [TZS0] (21 C)
ACPI: Thermal Zone [TZS2] (22 C)
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 23 (level, low) -> IRQ 201
eth0: RealTek RTL8139 at 0xffffc2000001e000, 00:0a:e4:ac:91:31, IRQ 201
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Attempting manual resume
swsusp: Suspend partition has wrong signature?
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x92a0b1, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block
18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
NTFS driver 2.1.23 [Flags: R/W MODULE].
NTFS volume version 3.1.
lp: driver loaded but no devices found
Adding 1365516k swap on /dev/hda3. Priority:-1 extents:1
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff803cf500(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1786 buckets, 14288 max) - 304 bytes per conntrack
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 209
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 209, io mem 0xd0000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 209
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 209, io mem 0xd0001000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
usb 1-2: new full speed USB device using ohci_hcd and address 3
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 209
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 209, io mem 0xd0002000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
usb 1-1: USB disconnect, address 2
usb 1-1: new low speed USB device using ohci_hcd and address 4
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 20 (level, low) -> IRQ 177
Yenta: CardBus bridge found at 0000:02:09.0 [1734:1092]
ieee1394: Initialized config rom entry `ip1394'
usb 1-2: USB disconnect, address 3
Yenta: ISA IRQ mask 0x0ef8, PCI irq 177
Socket status: 30000410
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
ohci1394: $Rev: 1299 $ Ben Collins <bcollins at debian.org>
ACPI: PCI Interrupt 0000:02:09.2[C] -> GSI 21 (level, low) -> IRQ 169
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[d0208800-d0208fff]
Ma
x Packet=[2048]
usb 1-2: new full speed USB device using ohci_hcd and address 5
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae4053610386c]
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:13.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
cs: memory probe 0x20000000-0x21ffffff: excluding 0x20000000-0x21ffffff
cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff
ASIC rev 1,<6>eth1: 3C574-TX Fast EtherLink PC Card at io 0x300, irq 177,
hw_a
ddr 00:60:08:E9:E1:90.
1024K FIFO split 3:5 Rx:Tx, autoselect MII interface.
bootsplash: status on console 0 changed to on
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
eth1: found link beat
eth1: autonegotiation complete: 100baseT-FD selected
eth1: remote fault detected
IA-32 Microcode Update Driver: v1.14 <tigran at veritas.com>
microcode: CPU0 not a capable Intel processor
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0xe (1200 mV)
powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x18 (950 mV)
cpu_init done, current fid 0x0, vid 0x18
eth0: no IPv6 routers present
eth1: no IPv6 routers present
bootsplash: status on console 0 changed to on
bootsplash: status on console 0 changed to on
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.99 DST=224.0.0.251
LEN=109
TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.99 DST=224.0.0.251
LEN=109
TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 17
NET: Registered protocol family 24
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.99 DST=224.0.0.251
[........das geht noch zig Zeilen so weiter.........]
More information about the Linux
mailing list