defekte Platte ???
Konstantin Nebel
konnebel at gmx.de
Tue Jan 13 20:45:34 CET 2009
Am Dienstag, 13. Januar 2009 11:47:27 schrieb Jan-Benedict Glaw:
> On Sat, 2009-01-10 12:28:24 +0100, Konstantin Nebel <konnebel at gmx.de> wrote:
> > Hi,
> >
> > ich habe ein 3ware 8506-4LP Raid Controller mit einem Raid-5 am Laufen.
> > Ich höre ab und an fehlergeräusche von einer der Festplatten. Meiner
> > Meinung nach sehe ich aber nichts in Smart, was auf einen Defekt
> > hinweist. Hier die Auszüge den 3 Pladden. Vielleicht seht ihr den Fehler.
> >
> > smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce
> > Allen Home page is http://smartmontools.sourceforge.net/
> >
> > === START OF INFORMATION SECTION ===
> > Model Family: SAMSUNG SpinPoint P120 series
> > Device Model: SAMSUNG SP2504C
> > Serial Number: 301012FP432889
> > Firmware Version: VT100-59
> > User Capacity: 250.059.350.016 bytes
> > Device is: In smartctl database [for details use: -P show]
> > ATA Version is: 7
> > ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
> > Local Time is: Sat Jan 10 12:15:35 2009 CET
> >
> > ==> WARNING: May need -F samsung3 enabled; see manual for details.
> >
> > SMART support is: Available - device has SMART capability.
> > SMART support is: Enabled
> >
> > === START OF READ SMART DATA SECTION ===
> > SMART overall-health self-assessment test result: PASSED
> >
> > General SMART Values:
> > Offline data collection status: (0x02) Offline data collection activity
> > was completed without error.
> > Auto Offline Data Collection: Disabled.
> > Self-test execution status: ( 0) The previous self-test routine
> > completed
> > without error or no self-test has ever
> > been run.
> > Total time to complete Offline
> > data collection: (5066) seconds.
> > Offline data collection
> > capabilities: (0x5b) SMART execute Offline immediate.
> > Auto Offline data collection on/off support.
> > Suspend Offline collection upon new
> > command.
> > Offline surface scan supported.
> > Self-test supported.
> > No Conveyance Self-test supported.
> > Selective Self-test supported.
> > SMART capabilities: (0x0003) Saves SMART data before entering
> > power-saving mode.
> > Supports SMART auto save timer.
> > Error logging capability: (0x01) Error logging supported.
> > General Purpose Logging supported.
> > Short self-test routine
> > recommended polling time: ( 1) minutes.
> > Extended self-test routine
> > recommended polling time: ( 84) minutes.
> > SCT capabilities: (0x003f) SCT Status supported.
> > SCT Feature Control supported.
> > SCT Data Table supported.
> >
> > SMART Attributes Data Structure revision number: 16
> > Vendor Specific SMART Attributes with Thresholds:
> > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
> > WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051
> > Pre-fail Always - 0 3 Spin_Up_Time 0x0007
> > 253 253 025 Pre-fail Always - 5824 4 Start_Stop_Count
> > 0x0032 100 100 000 Old_age Always - 92 5
> > Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always
> > - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail
> > Always - 0 8 Seek_Time_Performance 0x0025 253 253
> > 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032
> > 100 100 000 Old_age Always - 3032 10
> > Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always
> > - 0 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age
> > Always - 0 12 Power_Cycle_Count 0x0032 100 100
> > 000 Old_age Always - 83 187 Reported_Uncorrect
> > 0x0032 253 253 000 Old_age Always - 196608
>
>
> ^^^^^^
>
> > 190 Airflow_Temperature_Cel 0x0022 109 094 000 Old_age Always
> > - 43 194 Temperature_Celsius 0x0022 109 094 000
> > Old_age Always - 43 195 Hardware_ECC_Recovered 0x001a
> > 100 100 000 Old_age Always - 25285952 196
> > Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
> > - 0 197 Current_Pending_Sector 0x0012 253 253 000
> > Old_age Always - 0 198 Offline_Uncorrectable 0x0030 253
> > 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count
> > 0x003e 200 200 000 Old_age Always - 0 200
> > Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
> > - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000
> > Old_age Always - 0 202 TA_Increase_Count 0x0032 253
> > 253 000 Old_age Always - 0
> >
> > SMART Error Log Version: 1
> > No Errors Logged
> >
> > SMART Self-test log structure revision number 1
> > Num Test_Description Status Remaining
> > LifeTime(hours) LBA_of_first_error
> > # 1 Extended offline Completed without error 00% 2793
> > - # 2 Extended offline Interrupted (host reset) 70% 2346
> > - # 3 Extended offline Completed without error 00%
> > 1417 - # 4 Extended offline Completed without error 00%
> > 643 - # 5 Extended offline Completed without error
> > 00% 360 - # 6 Extended offline Completed without error
> > 00% 245 -
> >
> > SMART Selective Self-Test Log Data Structure Revision Number (0) should
> > be 1 SMART Selective self-test log data structure revision number 0
> > Warning: ATA Specification requires selective self-test log data
> > structure revision number = 1
> > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> > 1 0 0 Not_testing
> > 2 0 0 Not_testing
> > 3 0 0 Not_testing
> > 4 0 0 Not_testing
> > 5 0 0 Not_testing
> > Selective self-test flags (0x0):
> > After scanning selected spans, do NOT read-scan remainder of disk.
> > If Selective self-test is pending on power-up, resume after 0 minute
> > delay.
> >
> > ______________________________________
> >
> >
> > smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce
> > Allen Home page is http://smartmontools.sourceforge.net/
> >
> > === START OF INFORMATION SECTION ===
> > Model Family: SAMSUNG SpinPoint P120 series
> > Device Model: SAMSUNG SP2504C
> > Serial Number: S09QJ1GL302662
> > Firmware Version: VT100-33
> > User Capacity: 250.059.350.016 bytes
> > Device is: In smartctl database [for details use: -P show]
> > ATA Version is: 7
> > ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
> > Local Time is: Sat Jan 10 12:15:51 2009 CET
> >
> > ==> WARNING: May need -F samsung3 enabled; see manual for details.
> >
> > SMART support is: Available - device has SMART capability.
> > SMART support is: Enabled
> >
> > === START OF READ SMART DATA SECTION ===
> > SMART overall-health self-assessment test result: PASSED
> >
> > General SMART Values:
> > Offline data collection status: (0x82) Offline data collection activity
> > was completed without error.
> > Auto Offline Data Collection: Enabled.
> > Self-test execution status: ( 0) The previous self-test routine
> > completed
> > without error or no self-test has ever
> > been run.
> > Total time to complete Offline
> > data collection: (4806) seconds.
> > Offline data collection
> > capabilities: (0x5b) SMART execute Offline immediate.
> > Auto Offline data collection on/off support.
> > Suspend Offline collection upon new
> > command.
> > Offline surface scan supported.
> > Self-test supported.
> > No Conveyance Self-test supported.
> > Selective Self-test supported.
> > SMART capabilities: (0x0003) Saves SMART data before entering
> > power-saving mode.
> > Supports SMART auto save timer.
> > Error logging capability: (0x01) Error logging supported.
> > General Purpose Logging supported.
> > Short self-test routine
> > recommended polling time: ( 1) minutes.
> > Extended self-test routine
> > recommended polling time: ( 80) minutes.
> >
> > SMART Attributes Data Structure revision number: 16
> > Vendor Specific SMART Attributes with Thresholds:
> > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
> > WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051
> > Pre-fail Always - 10 3 Spin_Up_Time 0x0007
> > 100 100 025 Pre-fail Always - 6016 4 Start_Stop_Count
> > 0x0032 100 100 000 Old_age Always - 689 5
> > Reallocated_Sector_Ct 0x0033 077 077 010 Pre-fail Always
> > - 219 7 Seek_Error_Rate 0x000f 253 253 051
> > Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253
> > 253 015 Pre-fail Offline - 0 9 Power_On_Hours
> > 0x0032 100 100 000 Old_age Always - 17874 10
> > Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always
> > - 0 11 Calibration_Retry_Count 0x0012 253 002 000 Old_age
> > Always - 0 12 Power_Cycle_Count 0x0032 100 100
> > 000 Old_age Always - 663 190 Airflow_Temperature_Cel
> > 0x0022 115 082 000 Old_age Always - 41 194
> > Temperature_Celsius 0x0022 115 082 000 Old_age Always
> > - 41 195 Hardware_ECC_Recovered 0x001a 100 100 000
> > Old_age Always - 17806828 196 Reallocated_Event_Count
> > 0x0032 077 077 000 Old_age Always - 219 197
> > Current_Pending_Sector 0x0012 253 253 000 Old_age Always
> > - 0 198 Offline_Uncorrectable 0x0030 253 253 000
> > Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200
> > 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate
> > 0x000a 100 100 000 Old_age Always - 0 201
> > Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always
> > - 0 202 TA_Increase_Count 0x0032 253 253 000
> > Old_age Always - 0
> >
> > SMART Error Log Version: 1
> > No Errors Logged
> >
> > SMART Self-test log structure revision number 1
> > Num Test_Description Status Remaining
> > LifeTime(hours) LBA_of_first_error
> > # 1 Extended offline Completed without error 00% 17638
> > - # 2 Extended offline Interrupted (host reset) 20% 17352
> > - # 3 Extended offline Completed without error 00%
> > 16277 - # 4 Extended offline Completed without error
> > 00% 15985 - # 5 Extended offline Completed without error
> > 00% 15502 - # 6 Extended offline Completed without
> > error 00% 15223 - # 7 Extended offline Completed
> > without error 00% 15108 - # 8 Extended offline
> > Completed without error 00% 14615 - # 9 Extended
> > offline Completed without error 00% 14469 - #10
> > Extended offline Completed without error 00% 14202 -
> > #11 Extended offline Completed without error 00% 14171
> > -
> >
> > SMART Selective Self-Test Log Data Structure Revision Number (0) should
> > be 1 SMART Selective self-test log data structure revision number 0
> > Warning: ATA Specification requires selective self-test log data
> > structure revision number = 1
> > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> > 1 0 0 Not_testing
> > 2 0 0 Not_testing
> > 3 0 0 Not_testing
> > 4 0 0 Not_testing
> > 5 0 0 Not_testing
> > Selective self-test flags (0x0):
> > After scanning selected spans, do NOT read-scan remainder of disk.
> > If Selective self-test is pending on power-up, resume after 0 minute
> > delay.
> >
> > ______________________________________
> >
> > smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce
> > Allen Home page is http://smartmontools.sourceforge.net/
> >
> > === START OF INFORMATION SECTION ===
> > Model Family: SAMSUNG SpinPoint P120 series
> > Device Model: SAMSUNG SP2504C
> > Serial Number: S09QJ1GL302666
> > Firmware Version: VT100-33
> > User Capacity: 250.059.350.016 bytes
> > Device is: In smartctl database [for details use: -P show]
> > ATA Version is: 7
> > ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
> > Local Time is: Sat Jan 10 12:15:57 2009 CET
> >
> > ==> WARNING: May need -F samsung3 enabled; see manual for details.
> >
> > SMART support is: Available - device has SMART capability.
> > SMART support is: Enabled
> >
> > === START OF READ SMART DATA SECTION ===
> > SMART overall-health self-assessment test result: PASSED
> >
> > General SMART Values:
> > Offline data collection status: (0x82) Offline data collection activity
> > was completed without error.
> > Auto Offline Data Collection: Enabled.
> > Self-test execution status: ( 0) The previous self-test routine
> > completed
> > without error or no self-test has ever
> > been run.
> > Total time to complete Offline
> > data collection: (4836) seconds.
> > Offline data collection
> > capabilities: (0x5b) SMART execute Offline immediate.
> > Auto Offline data collection on/off support.
> > Suspend Offline collection upon new
> > command.
> > Offline surface scan supported.
> > Self-test supported.
> > No Conveyance Self-test supported.
> > Selective Self-test supported.
> > SMART capabilities: (0x0003) Saves SMART data before entering
> > power-saving mode.
> > Supports SMART auto save timer.
> > Error logging capability: (0x01) Error logging supported.
> > General Purpose Logging supported.
> > Short self-test routine
> > recommended polling time: ( 1) minutes.
> > Extended self-test routine
> > recommended polling time: ( 80) minutes.
> >
> > SMART Attributes Data Structure revision number: 16
> > Vendor Specific SMART Attributes with Thresholds:
> > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
> > WHEN_FAILED RAW_VALUE
> > 1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always
> > - 163 3 Spin_Up_Time 0x0007 100 100 025
> > Pre-fail Always - 5952 4 Start_Stop_Count 0x0032
> > 100 100 000 Old_age Always - 692 5
> > Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always
> > - 1 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail
> > Always - 0 8 Seek_Time_Performance 0x0025 253 253
> > 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032
> > 100 100 000 Old_age Always - 17893 10
> > Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always
> > - 0 11 Calibration_Retry_Count 0x0012 100 002 000 Old_age
> > Always - 33
>
>
> ^^
>
> > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
> > - 666 190 Airflow_Temperature_Cel 0x0022 121 082 000
> > Old_age Always - 39 194 Temperature_Celsius 0x0022
> > 121 082 000 Old_age Always - 39 195
> > Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
> > - 44236889 196 Reallocated_Event_Count 0x0032 100 100 000
> > Old_age Always - 1 197 Current_Pending_Sector 0x0012 253
> > 100 000 Old_age Always - 0 198 Offline_Uncorrectable
> > 0x0030 253 253 000 Old_age Offline - 0 199
> > UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
> > - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000
> > Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100
> > 100 000 Old_age Always - 0 202 TA_Increase_Count
> > 0x0032 253 253 000 Old_age Always - 0
> >
> > SMART Error Log Version: 1
> > No Errors Logged
> >
> > SMART Self-test log structure revision number 1
> > Num Test_Description Status Remaining
> > LifeTime(hours) LBA_of_first_error
> > # 1 Extended offline Completed without error 00% 17657
> > - # 2 Extended offline Interrupted (host reset) 40% 17361
> > - # 3 Extended offline Completed without error 00%
> > 16457 - # 4 Extended offline Completed without error
> > 00% 16288 - # 5 Extended offline Completed without error
> > 00% 15997 - # 6 Extended offline Completed without
> > error 00% 15514 - # 7 Extended offline Completed
> > without error 00% 15235 - # 8 Extended offline
> > Completed without error 00% 15120 - # 9 Extended
> > offline Completed without error 00% 14627 - #10
> > Extended offline Completed without error 00% 14481 -
> > #11 Extended offline Completed without error 00% 14210
> > - #12 Extended offline Completed without error 00% 14182
> > -
> >
> > SMART Selective Self-Test Log Data Structure Revision Number (0) should
> > be 1 SMART Selective self-test log data structure revision number 0
> > Warning: ATA Specification requires selective self-test log data
> > structure revision number = 1
> > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> > 1 0 0 Not_testing
> > 2 0 0 Not_testing
> > 3 0 0 Not_testing
> > 4 0 0 Not_testing
> > 5 0 0 Not_testing
> > Selective self-test flags (0x0):
> > After scanning selected spans, do NOT read-scan remainder of disk.
> > If Selective self-test is pending on power-up, resume after 0 minute
> > delay.
> >
> > Hier noch der Auszug aus dem Raid-Controller:
> >
> > Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache
> > AVrfy
> > -------------------------------------------------------------------------
> >----- u0 RAID-5 OK - - 64K 465.77 ON
> > -
> >
> > Port Status Unit Size Blocks Serial
> > ---------------------------------------------------------------
> > p0 OK u0 232.88 GB 488397168 301012FP432889
> > p1 NOT-PRESENT - - - -
> > p2 OK u0 232.88 GB 488397168 S09QJ1GL302662
> > p3 OK u0 232.88 GB 488397168 S09QJ1GL302666
>
> Ergo: Die erste Platte hat bei 200000 Zugriffen keine Daten liefern
> können. Die dritte Platte scheint (selten) mal Probleme dabei zu
> haben, die Spur zu finden.
>
> MfG, JBG
Hi Jan, soll ich die Platte tauschen? Und sei mir nich böse. An welcher
Ausgabe hast du das genau erkannt?
--
Mit freundlichen Grüßen,
Konstantin Nebel
05472 / 9544415
0175 / 3584447
konnebel at gmx.de
More information about the Linux
mailing list