X verweigert hohe Auflösung
Stefan U. Hegner
stefan at hegner-online.de
Tue Oct 13 12:37:01 CEST 2009
Hi Jan,
Jan 'RedBully' Seiffert schrieb:
> Hmmm, wie waers es mit dem ganzen Xorg.log?
>
Welche wolltest Du denn? - Die mit oder die ohne xorg.conf? - Hab beide
mal als bzip2 angehängt.
> Und der Ausgabe von "xrandr --verbose".
>
$ xrandr --verbose
Screen 0: minimum 320 x 200, current 1280 x 768, maximum 1440 x 1200
VGA-0 connected 1280x768+0+0 (0x5c) normal (normal left inverted right x axis y axis) 0mm x 0mm
Identifier: 0x53
Timestamp: 72680387
Subpixel: no subpixels
Clones: DVI-0
CRTC: 0
CRTCs: 0
load_detection: 1 (0x00000001) range: (0,1)
1280x1024 (0x55) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1440x900 (0x56) 108.8MHz +HSync +VSync
h: width 1440 start 1472 end 1880 total 1912 skew 0 clock 56.9KHz
v: height 900 start 918 end 927 total 946 clock 60.2Hz
1280x960 (0x57) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1280x960 (0x58) 101.2MHz -HSync +VSync
h: width 1280 start 1360 end 1488 total 1696 skew 0 clock 59.7KHz
v: height 960 start 963 end 967 total 996 clock 59.9Hz
1280x800 (0x59) 83.5MHz
h: width 1280 start 1344 end 1480 total 1680 skew 0 clock 49.7KHz
v: height 800 start 801 end 804 total 828 clock 60.0Hz
1152x864 (0x5a) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1152x864 (0x5b) 81.8MHz -HSync +VSync
h: width 1152 start 1216 end 1336 total 1520 skew 0 clock 53.8KHz
v: height 864 start 867 end 871 total 897 clock 60.0Hz
1280x768 (0x5c) 80.1MHz *current
h: width 1280 start 1344 end 1480 total 1680 skew 0 clock 47.7KHz
v: height 768 start 769 end 772 total 795 clock 60.0Hz
1024x768 (0x5d) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x5e) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
1024x768 (0x5f) 63.5MHz -HSync +VSync
h: width 1024 start 1072 end 1176 total 1328 skew 0 clock 47.8KHz
v: height 768 start 771 end 775 total 798 clock 59.9Hz
832x624 (0x60) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x61) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x62) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x63) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x64) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x65) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 492 total 520 clock 72.8Hz
640x480 (0x66) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x67) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
DVI-0 disconnected (normal left inverted right x axis y axis)
Identifier: 0x54
Timestamp: 72680387
Subpixel: no subpixels
Clones: VGA-0
CRTCs: 0
dvi_monitor_type: auto
scaler: off
load_detection: 0 (0x00000000) range: (0,1)
Habe daraufhin mal probiert mit xrandr zu spielen:
$ xrandr --newmode "1680x1050" 154.20 1680 1712 2296 2328 1050 1071 1081 1103
$ xrandr --addmode VGA-0 1680x1050
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 155 (RANDR)
Minor opcode of failed request: 18 ()
Serial number of failed request: 14
Current serial number in output stream: 15
... aber wirklich weitergekommen bin ich damit bisher noch nicht.
Apropos: Kann das in diesem Falle Stress machen, dass eine KVMoverCat5
Box zwischen Box und Monitor hängt? - Wie gesagt, beim alten xorg.conf
Setup unter Etch war das kein Thema.
LG
Stefan.
--
Stefan U. Hegner
<stefan at hegner-online.de>
* * *
D-32584 Löhne --- good ole Germany
internet: http://www.hegner-web.de
* * *
GPG-Key | D9DB 51BD 2DA6 9B3A 41CB
F-Print | 0287 05A1 8D11 38BA CE91
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log-mit-xorg.conf.bz2
Type: application/octet-stream
Size: 8738 bytes
Desc: not available
URL: <http://lug-owl.de/pipermail/linux/attachments/20091013/a3b05f7b/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log-ohne-xorg.conf.bz2
Type: application/octet-stream
Size: 5805 bytes
Desc: not available
URL: <http://lug-owl.de/pipermail/linux/attachments/20091013/a3b05f7b/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 197 bytes
Desc: OpenPGP digital signature
URL: <http://lug-owl.de/pipermail/linux/attachments/20091013/a3b05f7b/attachment.sig>
More information about the Linux
mailing list