- Linux - LUG OWL

Kernel Panic nach Systemumzug
by Kai Krebber 29 Feb '08

29 Feb '08

Hallo, Habe die vertrauensvolle Aufgabe, ein virtualisiertes Gentoo-Linux von einem ESX-Server auf einer VMWare Workstation zum Laufen zu bringen. Nach Export vom ESX und anpassen des virtualisierten Controllers von LSI zu Buslogic gemäß http://theether.net/kb/100038 (angepasst auf dass vorliegende gentoo mit folgender mkinitrd-Zeile: mkinitrd --preload=BusLogic --with=BusLogic -f /boot/initrd-2.6.11-gentoo-r9 2.6.11-gentoo-r9) fängt die Kiste auch an zu booten , bleibt dann aber mit folgendem Abgesang hängen: : Mounting proc filesystem Creating block devices failed to create /dev/sda failed to create /dev/sda1 failed to create /dev/sda2 failed to create /dev/sda3 Creating root device mkrootdev: mknod failed: 30 Mounting root filesystem mount: error 2 mounting ext3 pivotroot: pivot_root(/sysroot,/sysroot/initrd) failed: 2 unmount /initrd/proc failed: 2 Kernel panic - not syncing: Attempted to kill init! Muss die initrd evtl. anders aussehen? Gruß, Kai

2 1

GRUB umziehen
by Uwe Schuerkamp 27 Feb '08

27 Feb '08

So, nun aber, der Rest ging ganz einfach: - Platte auf /dev/hda umgebaut (war vorher hdc), sda unverändert gelassen, - Von grub-Floppy System auf sda gebootet - grub-install /dev/hda --recheck - Reboot & im BIOS-Boot-Priority auf /dev/hda gesetzt - Fertig Noch mal vielen Dank für eure Hilfe. Ich glaube, ohne den Zwischenschritt über die boot-floppy wärs doch deutlich schwieriger gewesen. Viele Grüße, uwe

1 0

AW: GRUB umziehen
by Kai Krebber 27 Feb '08

27 Feb '08

Hi! Die ganze Grub-Diskussion finde ich sehr anregend, mich näher mit den Internita zu beschäftigen. Habe bei mir mal /boot/grub/stage1 mit dem MBR verglichen und unterschiede festgestellt: fortytwo:/grubanalyse# od -x -Ax 42.mbr 000000 48eb 0190 01b5 494c 4f4c 0516 5a13 4006 000010 0000 0000 0100 a5f2 bac9 234c 8000 0d60 000020 101c b800 07c0 d08e 00bc fb08 5352 5606 000030 8efc 31d8 60ed 00b8 b312 cd36 6110 0203 : 0001f0 0000 0000 0000 0000 0000 0000 0000 aa55 fortytwo:/grubanalyse# od -x -Ax /boot/grub/stage1 000000 48eb 0090 0000 0000 0000 0000 0000 0000 000010 0000 0000 0000 0000 0000 0000 0000 0000 * 000030 0000 0000 0000 0000 0000 0000 0000 0203 : 0001f0 b501 e94f fee0 0000 0000 0000 0000 aa55 Alles ab 00003e ist gleich, aber woher kommen die Differenzen im oberen Bereich und wie sind die Daten im MBR hier zu interpretieren?

2 1

GRUB umziehen
by Uwe Schuerkamp 27 Feb '08

27 Feb '08

Hallo Liste, ich würde gern den grub-bootloader umziehen. Folgende Situation (Gentoo Linux): /dev/hda enthält den bootsector, soll aber ausgebaut werden (IDE-Platte) /dev/sda enthält das root-FS und /boot (SATA-Device, idealerweise soll alles von dieser Platte laufen) /dev/hdc ist die Backup-Platte, läuft nur 1x nachts fürs Backup an und legt sich dann wieder schlafen. /dev/hdd wird schon länger nicht mehr genutzt (das ist die alte Backup-Platte /dev/hdb: Brenner / DVD-Laufwerk Nach dem Ausbau von hda würde ich gern hdc zu hda machen, dort den bootsector installieren (die Maschine läuft 24x7, ist also nicht schlimm, wenn zum reboot mal die Platte anläuft, da sie per hdparm eh nach 5 Minuten ausgeschaltet wird). Wie kann ich es nun anstellen, z. B. eine Kopie des vorhandenen Bootsektors auf hdc zu schreiben, die Platten aus- bzw. umzubauen und dann alles wieder normal booten zu lassen? Oder ist es z. B. möglich, per BIOS den SATA-Platten prio 1 zuzuordnen und dort dann auch per grub-setup den Bootsektor unterzubringen? Freundliche Grüße und herzlichen Dank im voraus für eure Tipps, Uwe Hier meine aktuelle menu.lst: ##########################snip snip #################### default 1 timeout 10 splashimage=(hd0,0)/grub/splash.xpm.gz title=Gentoo Linux 2.6.21 (SATA drive sda) root (hd0,0) kernel (hd0,0)/vmlinuz-2.6.21 root=/dev/sda4 gentoo=udev title=Gentoo Linux 2.6.24 (SATA drive sda) root (hd0,0) kernel (hd0,0)/vmlinuz-2.6.24 root=/dev/sda4 gentoo=udev # ubuntu ist nur zu Testzwecken installiert title Ubuntu, kernel 2.6.22-14-generic root (hd1,2) kernel /boot/vmlinuz-2.6.22-14-generic root=/dev/sda3 ro initrd /boot/initrd.img-2.6.22-14-generic quiet title=Gentoo Linux 2.6.21 (IDE drive hda) root (hd0,0) kernel (hd0,0)/vmlinuz-2.6.21 root=/dev/hda3 gentoo=udev title=Gentoo Linux 2.6.20 root (hd0,0) kernel (hd0,0)/vmlinuz-2.6.20 root=/dev/hda3 gentoo=udev ############################snip snip #################

6 13

support DSL auf USB Stift + WLAN Konfiguration - USB Stift
by Gerd089＠web.de 25 Feb '08

25 Feb '08

hallo, kann mir jemand umgehend die Installation gegen entsprechendes Entgelt durchführen, da nach einem HD crash z.Zt. nur eine Knoppix Live CD auf meinem Notebook funzt. ( Raum Paderborn oder auch weiter ) Grüße Gerd Kloppenburg _____________________________________________________________________ Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/?mc=100071&distributionid=000000000066

1 0

Aktivitaeten der LUG-Paderborn
by Alexander Gretencord 24 Feb '08

24 Feb '08

Hallo, In der LUG-Paderborn kam gestern ein Vorschlag auf, den ich auf der Liste breittreten soll, um noch weitere Mitspieler zu finden. Also, wer haette Interesse an Folgendem: Vorschlag 1: Bowling unter der Liborigalerie. Mo-Mi kostet es pro Person und Stunde ab 19 Uhr 3EUR. Vorschlag 2: Pokerrunde. Termine wuerden wir dann auch noch abstecken muessen, aber ich denke wir sollten das an einem anderen Tag als der normalen LUG in Paderborn machen. Ich bitte um positive Meldungen, evtl. auch gleich mit Terminvorschlaegen oder Tagen an denen ihr auf keinen Fall koenntet. Alex

8 10

OT: Hardware abzugeben
by RalfGesellensetter 22 Feb '08

22 Feb '08

AOpen CD-RW (IDE), 2x Röhren-TV (80cm; 58cm - beide Stereo, VT), Kleiderschrank (80 breit, 180 hoch), Hifirack, Waschmaschine, mehr auf Nachfrage oder unter https://bielefeld.markt.de/show.htm?recordId=99f48d6a Sorry für OT. Gruß Ralf

1 0

Re: 'Entf' Taste funktioniert nicht
by Frank Wohlfahrt 22 Feb '08

22 Feb '08

Am Dienstag, 19. Februar 2008 10:38 schrieb Patrick Matthäi: > Die /var/log/Xorg.0.log und ~/.xsession-errors wäre eventuell > interessant bei diesem Problem. Die ServerLayout Section war verloren gegangen. Aber das Einfuegen bringt keinen Fortschritt. Hier die Logs (leider etwas laenglich ...). Kann jemand daraus etwas interpretieren ? DANKE !!! Frank .xsession-errors ------------------------------------------------------------------------ Xsession: X session started for frank at Di 19. Feb 18:46:43 CET 2008 startkde: Starting up... kbuildsycoca running... setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer hasDriver(pad.cpp:138) --- hasDriver setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer hasDriver(pad.cpp:138) --- hasDriver hasDriver(pad.cpp:138) --- hasDriver hasDriver(pad.cpp:138) --- hasDriver hasDriver(pad.cpp:138) --- hasDriver hasDriver(pad.cpp:138) --- hasDriver hasDriver(pad.cpp:138) --- hasDriver hasDriver(pad.cpp:138) --- hasDriver setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer hasDriver(pad.cpp:138) --- hasDriver setParam(pad.cpp:303) --- setParam setParam(pad.cpp:304) --- NOT YET THREAD SAFE! intVerToStrVer(pad.cpp:96) --- intVerToStrVer intVerToStrVer(pad.cpp:96) --- intVerToStrVer getInstance(pad.cpp:16) --- waiting for lock... Pad(pad.cpp:45) --- created singleton registerParameters(pad.cpp:489) --- registration done! init(pad.cpp:494) --- this version of libsynaptics supports the following driver versions: init(pad.cpp:499) --- --- 0.14.4 init(pad.cpp:499) --- --- 0.14.5 init(pad.cpp:499) --- --- 0.14.6 init(pad.cpp:501) --- initializing fitting driver segment... detectDriverVersion(pad.cpp:150) --- detecting driver version... detectDriverVersion(pad.cpp:162) --- can't access shared memory area. SHMConfig disabled? detectDriverVersion(pad.cpp:186) --- none found! driverVersion(pad.cpp:115) --- driverVersion init(pad.cpp:516) --- cannot access driver, please install and configure it properly! getInstance(pad.cpp:20) --- ...unlocking done! hasShm(pad.cpp:144) --- hasShm Xorg.0.log ------------------------------------------------------------------------ X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Linux Debian (xorg-server 2:1.3.0.0.dfsg-12lenny2) Current Operating System: Linux uranus 2.6.24-20080215 #1 SMP Fri Feb 15 20:00:51 CET 2008 i686 Build Date: 19 January 2008 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 19 18:45:55 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Configured Mouse" (==) |-->Input Device "Configured Mouse" (==) |-->Input Device "Generic Keyboard" (WW) The core pointer device wasn't specified explicitly in the layout. Using the first mouse device. (WW) The core keyboard device wasn't specified explicitly in the layout. Using the first keyboard device. (WW) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81e5320 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.2 X.Org XInput driver : 0.7 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (++) using VT number 7 (...snip...) (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.3.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.3.0, module version = 2.1.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 1.2 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.7 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33 (II) Primary Device is: PCI 00:02:0 (WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found (--) Chipset 965GM found (II) resource ranges after xf86ClaimFixedResources() call: (...snip...) (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 1.2 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.3.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.2 (II) intel(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (==) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFC000000 (II) intel(0): 2 display pipes available. (==) intel(0): Using XAA for acceleration (--) intel(0): Will try to allocate texture pool for old Mesa 3D driver. (II) intel(0): Will try to reserve 32768 kiB of AGP aperture space for the DRM memory manager. (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c"(II) Module already built-in (II) intel(0): Output VGA using monitor section Configured Monitor (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (II) intel(0): EDID for output LVDS (II) intel(0): Manufacturer: AUO Model: 2074 Serial#: 0 (II) intel(0): Year: 2005 Week: 1 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (II) intel(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21 (II) intel(0): Gamma: 2.20 (II) intel(0): No DPMS capabilities specified; RGB/Color Display (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555 (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported additional Video Mode: (II) intel(0): clock: 71.1 MHz Image Size: 331 x 207 mm (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) intel(0): AUO (II) intel(0): B154EW02 V0 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff0006af742000000000 (II) intel(0): 010f0103802115780a1cf59758508e27 (II) intel(0): 27505400000001010101010101010101 (II) intel(0): 010101010101c71b00a0502017303020 (II) intel(0): 36004bcf100000180000000f00000000 (II) intel(0): 00000000000000000020000000fe0041 (II) intel(0): 554f0a202020202020202020000000fe (II) intel(0): 004231353445573032205630200a00ac (II) intel(0): EDID vendor "AUO", prod id 8308 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules//libint10.so (II) intel(0): initializing int10 (WW) intel(0): Bad V_BIOS checksum (II) intel(0): Primary V_BIOS segment is: 0xc000 (II) intel(0): VESA BIOS detected (II) intel(0): VESA VBE Version 3.0 (II) intel(0): VESA VBE Total Mem: 7616 kB (II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS (II) intel(0): VESA VBE OEM Software Rev: 1.0 (II) intel(0): VESA VBE OEM Vendor: Intel Corporation (II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output TV has no monitor section (II) intel(0): Output VGA disconnected (II) intel(0): EDID for output VGA (II) intel(0): Output LVDS connected (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C device "LVDSDDC_C:ddc2" removed. (II) intel(0): EDID for output LVDS (II) intel(0): Manufacturer: AUO Model: 2074 Serial#: 0 (II) intel(0): Year: 2005 Week: 1 (II) intel(0): EDID Version: 1.3 (II) intel(0): Digital Display Input (...snip...) (II) intel(0): Output TV disconnected (II) intel(0): EDID for output TV (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TV disconnected (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): Monitoring connected displays enabled (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 1.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac"(II) Module already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0x80000008 to 0xc0000008 (WW) intel(0): PP_STATUS before: on, not ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing idle (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: (...snip...) (II) intel(0): Kernel reported 238592 total, 1 used (II) intel(0): I830CheckAvailableMemory: 954364 kB available (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers and large DRI memory manager reservation: (II) intel(0): Allocating 5472 scanlines for pixmap cache (II) intel(0): Success. (II) intel(0): Memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB) (II) intel(0): 0x00032000-0x00041fff: exa G965 state buffer (64 kB) (II) intel(0): 0x00050000-0x02147fff: front buffer (33760 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x02148000-0x02157fff: xaa scratch (64 kB) (II) intel(0): 0x02158000-0x02797fff: back buffer (6400 kB) (II) intel(0): 0x02798000-0x02dd7fff: depth buffer (6400 kB) (II) intel(0): 0x02dd8000-0x04dd7fff: textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): front buffer is not tiled (II) intel(0): back buffer is tiled (II) intel(0): depth buffer is tiled drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): [drm] loaded kernel module for "i915" driver (II) intel(0): [drm] DRM interface version 1.3 (II) intel(0): [drm] created "i915" driver at busid "pci:0000:00:02.0" (II) intel(0): [drm] added 8192 byte SAREA at 0xf91b6000 (II) intel(0): [drm] mapped SAREA 0xf91b6000 to 0xb7bbe000 (II) intel(0): [drm] framebuffer handle = 0xd0050000 (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): [drm] Registers = 0xfc000000 (II) intel(0): [drm] ring buffer = 0xd0000000 (II) intel(0): [drm] init sarea width,height = 1280 x 1280 (pitch 1280) (II) intel(0): [drm] Back Buffer = 0xd2158000 (II) intel(0): [drm] Depth Buffer = 0xd2798000 (II) intel(0): [drm] textures = 0xd2dd8000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): Page Flipping disabled (==) intel(0): Write-combining range (0xd0000000,0x10000000) (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) intel(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02148000 (pgoffset 8520) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02158000 (pgoffset 8536) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02798000 (pgoffset 10136) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02dd8000 (pgoffset 11736) (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TV is connected to pipe none (II) intel(0): Set up textured video (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (II) intel(0): [DRI] installation complete (II) intel(0): [drm] dma control initialized, using IRQ 16 (II) intel(0): direct rendering: Enabled (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension XAccessControlExtension (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (WW) AIGLX: 3D driver claims to not support visual 0x23 (WW) AIGLX: 3D driver claims to not support visual 0x24 (WW) AIGLX: 3D driver claims to not support visual 0x25 (WW) AIGLX: 3D driver claims to not support visual 0x26 (WW) AIGLX: 3D driver claims to not support visual 0x27 (WW) AIGLX: 3D driver claims to not support visual 0x28 (WW) AIGLX: 3D driver claims to not support visual 0x29 (WW) AIGLX: 3D driver claims to not support visual 0x2a (WW) AIGLX: 3D driver claims to not support visual 0x2b (WW) AIGLX: 3D driver claims to not support visual 0x2c (WW) AIGLX: 3D driver claims to not support visual 0x2d (WW) AIGLX: 3D driver claims to not support visual 0x2e (WW) AIGLX: 3D driver claims to not support visual 0x2f (WW) AIGLX: 3D driver claims to not support visual 0x30 (WW) AIGLX: 3D driver claims to not support visual 0x31 (WW) AIGLX: 3D driver claims to not support visual 0x32 (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 331 x 207 (**) Option "Protocol" "standard" (**) Generic Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Generic Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Generic Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "de" (**) Generic Keyboard: XkbLayout: "de" (**) Option "XkbVariant" "nodeadkeys" (**) Generic Keyboard: XkbVariant: "nodeadkeys" (**) Option "CustomKeycodes" "off" (**) Generic Keyboard: CustomKeycodes disabled (WW) Configured Mouse: No Device specified, looking for one... (II) Configured Mouse: Setting Device option to "/dev/input/mice" (--) Configured Mouse: Device: "/dev/input/mice" (==) Configured Mouse: Protocol: "Auto" (**) Option "Device" "/dev/input/mice" (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 9 (**) Configured Mouse: Sensitivity: 1 (**) Configured Mouse: Device: "/dev/input/mice" (==) Configured Mouse: Protocol: "Auto" (**) Option "CorePointer" (**) Configured Mouse: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 9 (**) Configured Mouse: Sensitivity: 1 (**) Option "CoreKeyboard" (**) Generic Keyboard: Core Keyboard (**) Option "Protocol" "standard" (**) Generic Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Generic Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Generic Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "de" (**) Generic Keyboard: XkbLayout: "de" (**) Option "XkbVariant" "nodeadkeys" (**) Generic Keyboard: XkbVariant: "nodeadkeys" (**) Option "CustomKeycodes" "off" (**) Generic Keyboard: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) (--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2" (II) Configured Mouse: ps2EnableDataReporting: succeeded

2 4

Xorg Konfigurierung / Touchpad
by Frank Wohlfahrt 21 Feb '08

21 Feb '08

Hallo, wie aus meinen vorherigen Postings ersichtlich, bin ich wieder zu Etch zurueckgekehrt (vielleicht waere Lenny doch besser bei Notebooks ????? ). folgendes Problem macht mich z.Z. verrueckt: Um das Touchpad (synaptics) konfigurieren zu koennen, muss ich xorg.conf editieren (mindestens: "SHMConfig" "on). Xorg ignoriert aber stumpf diesen Eintrag (Ueberhaupt kein Eintrag in Xorg.0.log). Per dpkg-reconfigure holt er sich immer den alten Stand aus der debconf database zurueck. Alle Versuche mit md5sum oder dexconf helfen nicht. Ich vermute das Problem liegt in der neuen Xorg Version 7.3, dem Backport von layer-acht.org. Fuer meine Intel Karte brauche ich aber mindestens Vers. 7.2. Ich koennte mich ja damit zufrieden geben, dass Xorg ueberhaupt funktioniert, oder das Touchpad (ohne Tapping, Scroll-Leiste). Und ein bisschen Stromsparen geht auch. Nach dem suspend von Klaptop muss nur der WLAN Treiber neu gestartet werden. Suspend von Kpowersave hat dafuer keine Funktion. Ich weiss dass dafuer nur Eintraege an der richtigen Stelle notwendig sind. Dieses ueberfordert aber momentan meine (Google-)Geduld. Ketzerische Gedanken umkreisen bereits Ubuntu. Aber sicherlich ist dort ebensowenig alles Gold was glaenzt ... Frage: Gibt es jemanden, der mir bei einem LUG Treffen bei diesen Problemen helfen koennte ? Ich komme aus Oelde. Rheda oder GT waere am besten, evtl. aber auch naechste Woche in Detmold ?? Frank ----- Debian Etch, Kernel 2.6.24, KDE 3.5.5 auf NB Acer Extensa 5220 -----

3 2

dringend: hardware benötigt....
by Dieter Franzke 21 Feb '08

21 Feb '08

Moin, ich brauche dringend einen Adaptec APA-1460 SCSI-Controller. Hat den noch jemand rumliegen oder weiss eine Bezugsquelle? selbst bei ebay ist keiner mehr zu bekommen.... ciao dieter -- Bitte beachten Sie, dass dem Gesetz zur Vorratsdatenspeicherung zufolge ab dem 1.1.2008 jeder elektronische Kontakt mit mir sechs Monate lang gespeichert wird. Nähere Informationen: http://www.stoppt-die-vorratsdatenspeicherung.de

3 3