defekte Platte ???
Konstantin Nebel
konnebel at gmx.de
Sat Jan 10 12:28:24 CET 2009
Hi,
ich habe ein 3ware 8506-4LP Raid Controller mit einem Raid-5 am Laufen. Ich
höre ab und an fehlergeräusche von einer der Festplatten. Meiner Meinung nach
sehe ich aber nichts in Smart, was auf einen Defekt hinweist. Hier die Auszüge
den 3 Pladden. Vielleicht seht ihr den Fehler.
smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P120 series
Device Model: SAMSUNG SP2504C
Serial Number: 301012FP432889
Firmware Version: VT100-59
User Capacity: 250.059.350.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Sat Jan 10 12:15:35 2009 CET
==> WARNING: May need -F samsung3 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (5066) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 84) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always
- 5824
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 92
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 3032
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 83
187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always
- 196608
190 Airflow_Temperature_Cel 0x0022 109 094 000 Old_age Always
- 43
194 Temperature_Celsius 0x0022 109 094 000 Old_age Always
- 43
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 25285952
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
202 TA_Increase_Count 0x0032 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 2793 -
# 2 Extended offline Interrupted (host reset) 70% 2346 -
# 3 Extended offline Completed without error 00% 1417 -
# 4 Extended offline Completed without error 00% 643 -
# 5 Extended offline Completed without error 00% 360 -
# 6 Extended offline Completed without error 00% 245 -
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure
revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
______________________________________
smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P120 series
Device Model: SAMSUNG SP2504C
Serial Number: S09QJ1GL302662
Firmware Version: VT100-33
User Capacity: 250.059.350.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Sat Jan 10 12:15:51 2009 CET
==> WARNING: May need -F samsung3 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (4806) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always
- 10
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always
- 6016
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 689
5 Reallocated_Sector_Ct 0x0033 077 077 010 Pre-fail Always
- 219
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 17874
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 663
190 Airflow_Temperature_Cel 0x0022 115 082 000 Old_age Always
- 41
194 Temperature_Celsius 0x0022 115 082 000 Old_age Always
- 41
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 17806828
196 Reallocated_Event_Count 0x0032 077 077 000 Old_age Always
- 219
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
202 TA_Increase_Count 0x0032 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 17638 -
# 2 Extended offline Interrupted (host reset) 20% 17352 -
# 3 Extended offline Completed without error 00% 16277 -
# 4 Extended offline Completed without error 00% 15985 -
# 5 Extended offline Completed without error 00% 15502 -
# 6 Extended offline Completed without error 00% 15223 -
# 7 Extended offline Completed without error 00% 15108 -
# 8 Extended offline Completed without error 00% 14615 -
# 9 Extended offline Completed without error 00% 14469 -
#10 Extended offline Completed without error 00% 14202 -
#11 Extended offline Completed without error 00% 14171 -
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure
revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
______________________________________
smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint P120 series
Device Model: SAMSUNG SP2504C
Serial Number: S09QJ1GL302666
Firmware Version: VT100-33
User Capacity: 250.059.350.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Sat Jan 10 12:15:57 2009 CET
==> WARNING: May need -F samsung3 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (4836) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always
- 163
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always
- 5952
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 692
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always
- 1
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 17893
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0012 100 002 000 Old_age Always
- 33
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 666
190 Airflow_Temperature_Cel 0x0022 121 082 000 Old_age Always
- 39
194 Temperature_Celsius 0x0022 121 082 000 Old_age Always
- 39
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 44236889
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 1
197 Current_Pending_Sector 0x0012 253 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
202 TA_Increase_Count 0x0032 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 17657 -
# 2 Extended offline Interrupted (host reset) 40% 17361 -
# 3 Extended offline Completed without error 00% 16457 -
# 4 Extended offline Completed without error 00% 16288 -
# 5 Extended offline Completed without error 00% 15997 -
# 6 Extended offline Completed without error 00% 15514 -
# 7 Extended offline Completed without error 00% 15235 -
# 8 Extended offline Completed without error 00% 15120 -
# 9 Extended offline Completed without error 00% 14627 -
#10 Extended offline Completed without error 00% 14481 -
#11 Extended offline Completed without error 00% 14210 -
#12 Extended offline Completed without error 00% 14182 -
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure
revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Hier noch der Auszug aus dem Raid-Controller:
Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy
------------------------------------------------------------------------------
u0 RAID-5 OK - - 64K 465.77 ON -
Port Status Unit Size Blocks Serial
---------------------------------------------------------------
p0 OK u0 232.88 GB 488397168 301012FP432889
p1 NOT-PRESENT - - - -
p2 OK u0 232.88 GB 488397168 S09QJ1GL302662
p3 OK u0 232.88 GB 488397168 S09QJ1GL302666
--
Gruß,
Konstantin Nebel
More information about the Linux
mailing list